CveMateVulnerability intelligence

Apache Camel vulnerabilities, page 3

86 vulnerabilities

Known vulnerabilities in Apache Camel, newest first, with CVSS severity, EPSS, KEV listings, ransomware use and the affected versions.

CVE-2026-55993apache software foundationapache camel atmosphere websocket+23mo ago06-07-2026 08:13

Improper Input Validation, Exposure of Sensitive Information to an Unauthorized Actor, Server-Side Request Forgery (SSRF) vulnerability in Apache Camel in Atmosphere Websocket Component. The camel-atmosphere-websocket consumer mapped inbound WebSocket query parameters into the Camel Exchange header map without applying any HeaderFilterStrategy (WebsocketConsumer.sendEventNotification() iterates the query-string map collected in WebsocketConsumer.service() and copies each entry into the Exchange). Because nothing blocked the Camel header namespace, a client connecting to the WebSocket endpoint could set Camel-internal control headers - including CamelHttpUri (Exchange.HTTP_URI) - simply by supplying them as query parameters. In a route where the WebSocket consumer feeds a downstream HTTP producer, the injected CamelHttpUri redirects the server-side HTTP request to an attacker-chosen destination (server-side request forgery - for example to an internal service or a cloud metadata endpoint). In addition, the HTTP producer resolves Camel property placeholders on the resulting (attacker-controlled) URI, so placeholders embedded in the injected value - such as an environment-variable reference, an application property, or a vault reference - are resolved to their real values and sent to the attacker, disclosing environment variables, application properties and vault secrets. When the WebSocket endpoint is exposed without authentication, this is reachable by an unauthenticated remote attacker. This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0. Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. The fix makes the consumer apply the HeaderFilterStrategy it already inherits from the HTTP/servlet stack, filtering the Camel header namespace case-insensitively on inbound mapping, so externally-supplied Camel* / camel* headers are no longer copied into the Exchange. For deployments that cannot upgrade immediately, strip the Camel control headers from the inbound message before they reach any downstream producer (for example removeHeaders('Camel*') and removeHeaders('camel*') at the start of the route), require authentication on the WebSocket endpoint, and avoid bridging an untrusted consumer directly into an HTTP producer whose target URI can be driven from message headers.CVE-2026-47323apache software foundationapache camel+25mo ago19-05-2026 12:25

Camel-CXF and Camel-Knative Message Header Injection via Missing Inbound Filtering The CXF and Knative HeaderFilterStrategy implementations (CxfRsHeaderFilterStrategy in camel-cxf-rest, CxfHeaderFilterStrategy in camel-cxf-transport, and KnativeHttpHeaderFilterStrategy in camel-knative-http) only filter outbound Camel-internal headers via setOutFilterStartsWith, while not configuring inbound filtering via setInFilterStartsWith. As a result, an unauthenticated attacker can inject Camel-internal headers (e.g. CamelExecCommandExecutable, CamelFileName) via HTTP requests to CXF-RS or CXF-SOAP endpoints. When a route forwards messages from these endpoints to header-driven components such as camel-exec or camel-file, the injected headers override configured values, enabling remote code execution or arbitrary file writes. This is the same pattern that was previously addressed in camel-undertow (CVE-2025-30177), the broader incoming-header filter (CVE-2025-27636 and CVE-2025-29891), and non-HTTP strategies (CVE-2026-40453). This issue affects Apache Camel: from 3.18.0 before 4.14.6, from 4.15.0 before 4.18.2. Users are recommended to upgrade to version 4.19.0, which fixes the issue. If users are on the 4.18.x LTS releases stream, then they are suggested to upgrade to 4.18.2. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.6.CVE-2026-42527apache software foundationapache camel+143mo ago06-07-2026 07:55

Deserialization of Untrusted Data vulnerability in Apache Camel. The default ObjectInputFilter pattern shipped with several Apache Camel components for defense-in-depth deserialization filtering ('java.**;javax.**;org.apache.camel.**;!*', or the no-'javax.**' variant in the aggregation-repository components) uses a recursive 'java.**' glob that admits classes whose hashCode/equals/readObject methods perform network I/O, notably java.net.URL and java.net.InetAddress. When an attacker can deliver a Java-serialized payload to an affected Camel consumer, deserialization of a HashMap (or any collection that calls hashCode on its elements) containing java.net.URL keys causes the JVM to issue DNS queries to the attacker-supplied host during the deserialization side-effect. The class-level filter check passes because the resulting object's class (HashMap) is allow-listed; the DNS query is observable on an attacker-controlled DNS server, providing an out-of-band side channel. The exposure is highest on the camel-jms family because JmsBinding.extractBodyFromJms invokes ObjectMessage.getObject() unconditionally when mapJmsMessage=true (default). Affected components: camel-jms, camel-sjms, camel-amqp, camel-mina, camel-netty, camel-netty-http, camel-vertx-http, camel-infinispan, and the aggregation repository components camel-leveldb, camel-cassandraql, camel-consul, camel-sql (JDBC aggregation repository). This issue affects Apache Camel: from 4.14.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0. Users are recommended to upgrade to a version that contains the CAMEL-23372 fix once available: 4.21.0 for the 4.21.x line, 4.18.3 for the 4.18.x line, and 4.14.8 for the 4.14.x line. For deployments that cannot upgrade immediately, configure a JMS-provider-side allow-list (Apache ActiveMQ Artemis 'deserializationAllowList' / 'deserializationDenyList', Apache ActiveMQ Classic 'org.apache.activemq.SERIALIZABLE_PACKAGES') as the primary mitigation, and/or override the in-code default via the endpoint-level 'deserializationFilter' option or the JVM-wide '-Djdk.serialFilter' system property with an explicit deny: '!java.net.**;java.**;javax.**;org.apache.camel.**;!*' (or '!java.net.**;java.**;org.apache.camel.**;!*' for the aggregation-repository components, which do not include javax.**).CVE-2026-48204apache software foundationapache camel+23mo ago06-07-2026 08:06

Improper Input Validation, Improper Access Control vulnerability in Apache Camel in Camel Mongodb Gridfs component. The camel-mongodb-gridfs producer selects the GridFS operation to perform from the gridfs.operation Exchange header when the endpoint's operation parameter is not set - which is the default. The control-header constants (GridFsConstants.GRIDFS_OPERATION, GRIDFS_OBJECT_ID, GRIDFS_METADATA, GRIDFS_CHUNKSIZE, GRIDFS_FILE_ID_PRODUCED) were the plain strings gridfs.operation, gridfs.objectid, gridfs.metadata, gridfs.chunksize and gridfs.fileid. Because these names do not start with the Camel / camel prefix, HttpHeaderFilterStrategy - which blocks only the Camel header namespace on the HTTP boundary - let them pass from an inbound HTTP request straight into the Exchange. In a route that bridges an HTTP consumer (for example platform-http) into a mongodb-gridfs: producer with no explicit operation, any HTTP client could therefore set the gridfs.operation header to override the route's intended operation - switching, for example, a file upload to remove (deleting a file identified by the attacker-supplied gridfs.objectid), listAll (enumerating every file in the bucket) or findOne (reading a file) - and supply a gridfs.metadata value that is parsed as a MongoDB document, enabling NoSQL operator injection. No credentials are required when the bridging consumer is unauthenticated. This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0. Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, routes that drive GridFS operations or metadata via the raw header names must use CamelGridFsOperation / CamelGridFsObjectId / CamelGridFsMetadata / CamelGridFsChunkSize / CamelGridFsFileId instead of the gridfs.* names. For deployments that cannot upgrade immediately, set an explicit operation on the mongodb-gridfs: endpoint so the operation is not taken from a header, and strip the gridfs.* headers from any untrusted ingress before the producer.CVE-2026-48203apache software foundationapache camel+23mo ago06-07-2026 08:06

Improper Neutralization of Special Elements in Output Used by a Downstream Component ('Injection'), Improper Input Validation, Server-Side Request Forgery (SSRF) vulnerability in Apache Camel Solr component. The camel-solr producer copies Exchange message headers whose names begin with the SolrParam. prefix into the parameters of the Solr request, and headers whose names begin with the SolrField. prefix into the fields of the indexed Solr document. The prefix constants (SolrConstants.HEADER_PARAM_PREFIX / HEADER_FIELD_PREFIX) were the plain strings SolrParam. / SolrField.. Because these names do not start with the Camel / camel prefix, HttpHeaderFilterStrategy - which blocks only the Camel header namespace on the HTTP boundary - let them pass from an inbound HTTP request straight into the Exchange. In a route that bridges an HTTP consumer (for example platform-http) into a solr: producer, any HTTP client could therefore set SolrParam.* headers to inject arbitrary Solr request parameters - including shards or stream.url, which cause the Solr server to issue server-side requests to an attacker-chosen URL (server-side request forgery, for example to an internal service or a cloud metadata endpoint), or qt to reach administrative request handlers - and set SolrField.* headers to inject arbitrary fields into indexed documents. No credentials are required when the bridging consumer is unauthenticated. This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0. Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, routes that set Solr parameters or fields via the raw header prefixes must use CamelSolrParam. / CamelSolrField. instead of SolrParam. / SolrField.. For deployments that cannot upgrade immediately, strip the SolrParam.* and SolrField.* headers from any untrusted ingress before the solr: producer, and set the required Solr parameters and fields from a trusted source in the route.CVE-2026-48205apache software foundationapache camel dns+23mo ago06-07-2026 08:08

Improper Input Validation, Server-Side Request Forgery (SSRF) vulnerability in Apache Camel DNS component. The camel-dns producers read DNS operation parameters - the resolver to query, the name or domain to look up, the record type and class, and the search term - from Exchange message headers whose constant values (DnsConstants.DNS_SERVER, DNS_NAME, DNS_DOMAIN, DNS_TYPE, DNS_CLASS, TERM) were the plain strings dns.server, dns.name, dns.domain, dns.type, dns.class and term. Because these names do not start with the Camel / camel prefix, HttpHeaderFilterStrategy - which blocks only the Camel header namespace on the HTTP boundary - let them pass from an inbound HTTP request straight into the Exchange. In a route that bridges an HTTP consumer (for example platform-http) into a dns: producer, any HTTP client could therefore set the dns.server header to make the dig producer build a SimpleResolver pointing at an attacker-controlled DNS server - a server-side request forgery via DNS, through which the attacker observes the queried name and can return poisoned responses - and set the dns.name / dns.domain headers to resolve arbitrary internal hostnames, disclosing whether they exist (internal network reconnaissance). No credentials are required when the bridging consumer is unauthenticated. This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0. Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, routes that drive DNS operations via the raw header names must use CamelDnsServer / CamelDnsName / CamelDnsDomain / CamelDnsType / CamelDnsClass / CamelDnsTerm instead of the dns.* / term names. For deployments that cannot upgrade immediately, strip the dns.* and term headers from any untrusted ingress before the dns: producer, and set the DNS server and lookup parameters from a trusted source in the route.CVE-2026-48206apache software foundationapache camel jira+23mo ago06-07-2026 08:09

Improper Input Validation, Authorization Bypass Through User-Controlled Key vulnerability in Apache Camel JIRA component. The camel-jira producers read their operation parameters - the issue key, project key, transition id, summary, type, assignee, components, watchers, link type, work-log minutes and others - from Exchange message headers. The header constants defined in JiraConstants (for example ISSUE_KEY = IssueKey, ISSUE_PROJECT_KEY = ProjectKey, ISSUE_TRANSITION_ID = IssueTransitionId, LINK_TYPE = linkType) used plain, non-Camel-prefixed values. Because these names do not start with the Camel / camel prefix, HttpHeaderFilterStrategy - which blocks only the Camel header namespace on the HTTP boundary - let them pass from an inbound HTTP request straight into the Exchange. In a route that bridges an HTTP consumer (for example platform-http) into a jira: producer, any HTTP client could therefore supply these headers and override the values the route intended, driving JIRA operations against the configured JIRA instance with the endpoint's configured service-account credentials - for example deleting or transitioning an arbitrary issue (via IssueKey / IssueTransitionId), creating an issue in a different project (via ProjectKey), modifying issue fields, adding or removing watchers, or logging work. The operations are bounded by what the configured service account is permitted to do. No credentials are required from the attacker when the bridging consumer is unauthenticated. This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0. Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, routes that drive JIRA operations via the raw header names must use the CamelJira* names (for example CamelJiraIssueKey) instead of the old values. For deployments that cannot upgrade immediately, strip the camel-jira control headers from any untrusted ingress before the jira: producer (for example removing the IssueKey, ProjectKey, IssueTransitionId and related headers at the start of the route), and set the required JIRA operation parameters from a trusted source.CVE-2026-25747apache software foundationapache camel leveldb+27mo ago23-02-2026 08:45

Deserialization of Untrusted Data vulnerability in Apache Camel LevelDB component. The Camel-LevelDB DefaultLevelDBSerializer class deserializes data read from the LevelDB aggregation repository using java.io.ObjectInputStream without applying any ObjectInputFilter or class-loading restrictions. An attacker who can write to the LevelDB database files used by a Camel application can inject a crafted serialized Java object that, when deserialized during normal aggregation repository operations, results in arbitrary code execution in the context of the application. This issue affects Apache Camel: from 4.10.0 before 4.10.8, from 4.14.0 before 4.14.5, from 4.15.0 before 4.18.0. Users are recommended to upgrade to version 4.18.0, which fixes the issue. For the 4.10.x LTS releases, users are recommended to upgrade to 4.10.9, while for 4.14.x LTS releases, users are recommended to upgrade to 4.14.5 CVE-2026-43866apache software foundationapache camel+73mo ago06-07-2026 08:35

Deserialization of Untrusted Data vulnerability in Apache Camel, Apache Camel JMS component. JmsBinding.extractBodyFromJms() in camel-jms - and the equivalent JmsBinding in camel-sjms - deserializes the payload of an incoming JMS ObjectMessage via jakarta.jms.ObjectMessage.getObject() whenever the mapJmsMessage option is enabled (the default) and Camel acts as a JMS consumer. The CVE-2026-40860 hardening added a post-deserialization class check that rejects classes outside the default allow-list java.**;javax.**;org.apache.camel.**;!*. However org.apache.camel.support.DefaultExchangeHolder itself lives in the allow-listed org.apache.camel.** namespace, so an ObjectMessage whose top-level object is a DefaultExchangeHolder passes the check. The receiving side then calls DefaultExchangeHolder.unmarshal() on it without requiring the transferExchange option to be enabled - an asymmetric trust boundary, since the sending side gates ObjectMessage and transferExchange handling but the receiving side did not - writing every non-null field of the holder into the Exchange: the message body, the IN and OUT headers, the exchange properties, the variables, the exchange id and the exception. An attacker who can publish an ObjectMessage to a queue or topic consumed by an affected Camel application can therefore inject arbitrary Exchange state using only universally-trusted java.lang and java.util types, with no deserialization gadget chain required, to manipulate routing and headers, exchange properties and error handling. The same handling applies to camel-sjms and camel-sjms2, and to the JMS-family components built on JmsComponent and JmsBinding: camel-amqp, camel-activemq and camel-activemq6. This is a bypass of the CVE-2026-40860 fix rather than a flaw in it. This issue affects Apache Camel: from 3.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0; Apache Camel: from 3.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0. Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, JMS ObjectMessage handling is disabled by default in camel-jms, camel-sjms and the JMS-family components (a new objectMessageEnabled option defaults to false at the component and endpoint level), so an incoming ObjectMessage - including a DefaultExchangeHolder payload - is no longer deserialized unless the option is explicitly enabled; only set objectMessageEnabled=true when the consumed JMS destination is fed exclusively by trusted producers. For deployments that cannot upgrade immediately, restrict publish access to the queues and topics consumed by Camel to trusted producers via JMS broker authorization, and do not expose JMS consumers that map ObjectMessage bodies to untrusted networks; a JMS-provider deserialization allow-list does not mitigate this specific bypass because the crafted payload uses only universally-trusted classes.CVE-2026-43865apache software foundationapache camel+23mo ago06-07-2026 07:55

Deserialization of Untrusted Data vulnerability in Apache Camel Hazelcast component. The camel-hazelcast component creates and manages Hazelcast instances using a default configuration that applies no Java deserialization filter. When Camel builds the Hazelcast Config itself - that is, when no user-supplied HazelcastInstance, hazelcastConfigUri, or referenced Config bean is provided - neither Hazelcast's JavaSerializationFilterConfig nor a Camel-side ObjectInputFilter is configured, so objects received over the Hazelcast cluster protocol are deserialized inside Hazelcast's own serialization layer (ObjectInputStream.readObject) before Camel ever processes them. An attacker who can join or otherwise reach the Hazelcast cluster can publish a crafted serialized Java object that is then deserialized on every Camel node, resulting in remote code execution. The exposure is present by default and requires no opt-in endpoint configuration: any route using a hazelcast consumer (hazelcast-topic, hazelcast-queue, hazelcast-seda, hazelcast-map, hazelcast-multimap, hazelcast-replicatedmap, hazelcast-list, hazelcast-set), as well as the HazelcastAggregationRepository and HazelcastIdempotentRepository, is affected whenever the managed instance is created from Camel's default configuration. This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0. Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. The fix makes Camel apply a default Hazelcast JavaSerializationFilterConfig (whitelisting the java., javax. and org.apache.camel. class-name prefixes and blacklisting java.net.) to instances it creates from its own default configuration, while leaving any user-supplied Config or HazelcastInstance untouched. For deployments that cannot upgrade immediately, configure a deserialization filter on the Hazelcast instance (Hazelcast JavaSerializationFilterConfig, or the JVM-wide system property -Djdk.serialFilter=!java.net.**;java.**;javax.**;org.apache.camel.**;!*) and enable Hazelcast cluster authentication and TLS to restrict who can reach the cluster.CVE-2026-43867apache software foundationapache camel+23mo ago06-07-2026 08:24

Deserialization of Untrusted Data vulnerability in Apache Camel PQC Component. The camel-pqc component persists post-quantum key metadata (KeyMetadata) through pluggable KeyLifecycleManager implementations. AwsSecretsManagerKeyLifecycleManager.deserializeMetadata() reads that metadata back from the configured AWS Secrets Manager secret by Base64-decoding the stored value and deserializing it with a raw java.io.ObjectInputStream.readObject() and no ObjectInputFilter or class allow-list; the cast to KeyMetadata happens only after readObject() returns, so any readObject() side effects in a crafted object run before the type check. A principal who can write to the AWS Secrets Manager secret that holds this metadata (requiring secretsmanager:PutSecretValue on that secret) could store a crafted serialized object that is deserialized during normal key-lifecycle operations, potentially leading to code execution in the context of the application that manages the keys. This is the same underlying defect, in the same code path and remediated by the same fix, as CVE-2026-46590, which was reported independently and additionally covers the HashiCorp Vault and file-based sibling managers; both are incomplete-remediation follow-ons to CVE-2026-40048 (CAMEL-23200). This issue affects Apache Camel: from 4.18.0 before 4.18.3, from 4.19.0 before 4.21.0. Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.18.x LTS releases stream, then they are suggested to upgrade to 4.18.3. For deployments that cannot upgrade immediately, restrict write access to the AWS Secrets Manager secret that holds the camel-pqc key metadata so that only the application’s own identity holds secretsmanager:PutSecretValue on it (least-privilege IAM), and keep the PQC key material in a secret separate from any data that less-trusted principals can write.CVE-2026-53913apache software foundationapache camel keycloak+23mo ago06-07-2026 08:12

Improper Authentication, Missing Authentication for Critical Function, Not Failing Securely ('Failing Open') vulnerability in Apache Camel Keycloak Component. The KeycloakSecurityPolicy of camel-keycloak guards a route by running KeycloakSecurityProcessor.beforeProcess(), which performs three checks in sequence: it rejects a request that carries no access token, then - only if requiredRoles is non-empty - validates the roles, and - only if requiredPermissions is non-empty - validates the permissions. The actual cryptographic verification of the bearer access token (signature, issuer and expiry for a local JWT, or active-state and issuer for token introspection) is performed exclusively inside those role and permission checks. KeycloakSecurityPolicy defaults requiredRoles and requiredPermissions to empty - which is the documented 'Basic Setup' - so on a route configured that way the role and permission checks are skipped and the access token is therefore never verified. The token-presence check still rejects a missing token, but an invalid token is accepted: any non-null value in the Authorization: Bearer header - including an arbitrary string or a forged, unsigned JWT - passes the policy and the request reaches the protected route, with no signature, issuer or expiry check and no request to Keycloak. The token is read from the inbound request header because allowTokenFromHeader defaults to true. Because the normal reason to place a route behind this policy is that the route performs server-side work, the bypass results in unauthenticated access to that work; where the protected route forwards to a code-execution-capable producer, it can result in unauthenticated remote code execution. This defect is independent of CVE-2026-23552: that issue concerned the issuer claim and was fixed by adding a check inside the verification routine, but here the verification routine is not reached at all in the default configuration, so the defect remains. This issue affects Apache Camel: from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0. Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. For deployments that cannot upgrade immediately, configure a non-empty requiredRoles or requiredPermissions on every KeycloakSecurityPolicy so that the token-verification path is exercised, set allowTokenFromHeader to false where the token is not expected from the request header, or perform token verification at the framework layer ahead of the policy.CVE-2026-56140apache software foundationapache camel aws2 sns+23mo ago06-07-2026 08:16

Improper Input Validation vulnerability in Apache Camel AWS SNS component. The camel-aws2-sns component filters Camel headers through a component-specific HeaderFilterStrategy, Sns2HeaderFilterStrategy. Like the sibling Sqs2HeaderFilterStrategy, it originally configured only an outbound filter (setOutFilterPattern, which blocks Camel*, breadcrumbId and org.apache.camel.* headers from being written out) and did not configure an inbound filter rule. For the related camel-aws2-sqs component this inbound gap was exploitable, because the Sqs2Consumer maps inbound SQS message attributes into the Camel Exchange via HeaderFilterStrategy.applyFilterToExternalHeaders, allowing a message sender to inject Camel control headers (tracked as CVE-2026-46456). camel-aws2-sns, by contrast, is producer-only: Sns2Endpoint does not support consumers (createConsumer throws UnsupportedOperationException, 'You cannot receive messages from this endpoint'), so no externally-supplied message attributes are ever mapped inbound into a Camel Exchange through SNS, and the missing inbound filter rule on Sns2HeaderFilterStrategy was therefore not reachable by an attacker. As part of the same fix (CAMEL-23506), an inbound filter rule (setInFilterStartsWith for the Camel namespace) was added to Sns2HeaderFilterStrategy so that its configuration matches the corrected Sqs2HeaderFilterStrategy and the other sibling strategies. This is a defense-in-depth alignment with no known exploit path in camel-aws2-sns. This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0. This is a defense-in-depth hardening change with no known exploit path in camel-aws2-sns, which is producer-only, so no urgent action or workaround is required. Users who want the aligned behaviour can upgrade to version 4.21.0, or to 4.14.8 on the 4.14.x LTS releases stream, or to 4.18.3 on the 4.18.x releases stream, which contain the change. As a general best practice, operators should continue to apply least-privilege IAM permissions on their SNS topics.CVE-2026-56139apache software foundationapache camel undertow+23mo ago06-07-2026 08:15

Generation of Error Message Containing Sensitive Information vulnerability in Apache Camel Undertow Component. The camel-undertow HTTP server consumer exposes a muteException option that controls what is returned to the client when a route processing error occurs. This option defaulted to false, whereas the other Camel HTTP server components (camel-http / camel-jetty / camel-servlet and camel-platform-http) default it to true. With muteException=false, when a request triggers an exception during route processing the consumer writes the full Throwable stack trace into the HTTP response body as text/plain instead of returning an empty body. Any unauthenticated client that can reach the endpoint and cause a processing error - for example by sending a malformed request body, an invalid parameter, or otherwise triggering a route-internal failure - therefore receives a complete Java stack trace. Such a stack trace can disclose sensitive internal information, including credentials embedded in exception messages, internal host names and IP addresses, filesystem paths, dependency and version details, database and class names, and the application's internal structure, which an attacker can use to plan further attacks. In addition, for Rest DSL consumers the muteException option was not honoured at all: the RestUndertowHttpBinding was created with a hard-coded false, so the stack trace was returned even when muteException=true had been configured. This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0. Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. For deployments that cannot upgrade immediately, set muteException=true explicitly on the camel-undertow consumer (for example undertow: http://0.0.0.0:8080/api?muteException=true , or globally via the camel.component.undertow.mute-exception=true property), so that processing errors no longer return the stack trace to the client; note that on affected releases this workaround does not cover Rest DSL consumers, whose binding ignores the option until the fix is applied.CVE-2026-66907apache software foundationapache camel+21mo ago24-08-2026 16:13

Relative path traversal vulnerability in Apache Camel Google Storage component. This issue affects Apache Camel: from 4.0.0 before 4.14.9, from 4.15.0 before 4.18.4, from 4.19.0 before 4.22.0. The camel-google-storage consumer downloads Google Cloud Storage objects to the local filesystem when the downloadFileName option is set. That option is documented as a folder or a filename, and when its value contains no expression token the consumer builds the local destination by appending the object name to it: evaluateFileExpression sets the Exchange file-name header to the remote object name and evaluates downloadFileName + "/${file:name}". The ${file:name} token returns the file-name header verbatim, unlike ${file:onlyname}, which applies FileUtil.stripPath to it. The resulting string was passed directly to new File(result) and blob.downloadTo(file.toPath()) with no lexical normalization and no check that the destination stayed inside the configured directory. The object name is not route-controlled data: the consumer lists the bucket, iterates every returned blob and creates one exchange per object from blob.getBlobId().getName() verbatim, and the filter option that could restrict those names is not applied at all unless it has been explicitly set. Google Cloud Storage object names are opaque UTF-8 keys that the service stores and lists exactly as written, with no server-side canonicalization, and a forward slash is only a display convention for pseudo-directories, so a key containing parent-directory segments survives round-tripping intact. An object name containing such segments therefore resolved to a location outside the configured downloadFileName directory, letting anyone able to influence the names present in the consumed bucket cause Camel to create or overwrite a file at a location of their choosing, with the privileges of the Camel process. Depending on what the process can write to, overwriting a file outside the download directory can escalate beyond the loss of integrity of that file. The downloadFileName option is an ordinary consumer parameter and carries no security marker, so nothing signalled to users that its value was not being enforced as a containment boundary. The defect is consumer-only; the producer has no download-to-file sink. Camel's other file-download consumers - camel-file, camel-ftp, camel-smb, camel-mina-sftp, camel-azure-files and the Azure Storage download paths - already constrained their local downloads to the configured directory using a path-segment boundary check; camel-google-storage was the remaining object-store download sink not covered by that work. Users are recommended to upgrade to version 4.22.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.9. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.4. For deployments that cannot upgrade immediately, set the filter option to a regular expression that accepts only simple single-segment object names, so that any name carrying a path separator or a parent-directory segment is excluded before an exchange is created; note that no filtering whatsoever is applied when the option is left unset, and that the expression is matched against the whole object name. Alternatively, give downloadFileName an explicit expression that does not carry the remote path through, for example one built on ${file:onlyname} rather than the implicit ${file:name}, keeping in mind that a downloadFileName containing an expression is treated as route-author-controlled and is not covered by the containment check added in the fix. As defence in depth, treat the object names in any externally writable bucket as untrusted input and do not derive local filesystem paths from them.CVE-2026-66908apache software foundationapache camel+31mo ago24-08-2026 16:14

Improper Authentication vulnerability in Apache Camel Platform HTTP Main component. This issue affects Apache Camel: from 4.8.0 before 4.22.0. The camel-main embedded HTTP server can protect its endpoints with JWT authentication, configured through authenticationEnabled together with the JWT keystore properties. JWTAuthenticationConfigurer.buildJwtOptions returned null when neither jwtIssuer nor jwtAudience was configured, and the caller then skipped the JWTAuthOptions.setJWTOptions call entirely, so the Vert.x JWTAuth instance was built from the keystore alone. The result was that inbound tokens were checked only for signature and expiry: the iss and aud claims were not validated at all. Nothing signalled this - the server started normally and reported no warning - so a deployment configured the documented way silently enforced less than the operator believed it had enabled, and the component documentation itself presented signature and expiry checking as the default with issuer and audience as an optional extra. Both the application server and the management server were affected, because the omission was in each of the two configureAuthentication paths. Any unexpired token signed by any key the configured keystore trusts was therefore accepted, regardless of which issuer minted it or which audience it was intended for. How far that reaches depends on the trust set of the keystore: where the signing key belongs to a shared or multi-tenant identity provider, a token legitimately issued for an entirely different audience is accepted, while a keystore holding a dedicated signer narrows it to reuse of tokens minted for other services within the same trust domain. The jwtIssuer and jwtAudience options did not exist before 4.21.0, so on earlier releases there was no supported way to have these claims enforced at all. Users are recommended to upgrade to version 4.22.0, which fixes the issue. From 4.22.0 the server refuses to start when a JWT keystore is configured but neither jwtIssuer nor jwtAudience is set, naming the properties involved, and a deployment that genuinely wants signature and expiry validation only must say so explicitly with the new jwtAllowMissingIssuerAndAudience option, which defaults to false. This behaviour is fixed only on 4.22.0. The 4.14.9 and 4.18.4 releases do not change the default: they add the jwtIssuer and jwtAudience options so that operators on those maintenance lines can enforce the claims by configuration, and an installation that upgrades to 4.14.9 or 4.18.4 without also setting at least one of those two properties is still accepting any unexpired token signed by a trusted key. Users on 4.14.x or 4.18.x should therefore upgrade to 4.14.9 or 4.18.4 and then set jwtIssuer, jwtAudience, or both. Releases from 4.8.0 up to and including 4.21.x offer no way to enforce these claims and should be moved to a version that does. Independently of version, restrict the JWT keystore to the smallest possible trust set - ideally a signer dedicated to this service rather than a shared identity-provider key - and where a gateway already validates issuer and audience in front of the server, ensure it cannot be bypassed. Notes: The JIRA ticket: https://issues.apache.org/jira/browse/CAMEL-24281 refers to the various commits that resolved the issue, and has more details. The fail-closed guard could not be backported. The jwtIssuer and jwtAudience options were themselves only introduced in 4.21.0 by CAMEL-23525, so on camel-4.18.x and camel-4.14.x there was nothing an operator could set to satisfy the requirement and the guard would have broken every JWT deployment on those branches with no remedy available.CVE-2026-66906apache software foundationapache camel+21mo ago24-08-2026 16:12

Relative path traversal vulnerability in Apache Camel Azure Storage Blob component. This issue affects Apache Camel: from 4.0.0 before 4.14.9, from 4.15.0 before 4.18.4, from 4.19.0 before 4.22.0. The camel-azure-storage-blob component can download an Azure Storage blob to the local filesystem through its downloadBlobToFile operation, writing into the directory named by the fileDir endpoint option, which is documented as usable from both the producer and the consumer. BlobOperations.downloadBlobToFile built the local target by joining fileDir with the remote blob name exactly as the Azure SDK reported it (new File(fileDir, client.getBlobName())) and passed the result straight to the SDK download call, with no lexical normalization and no check that the resolved location stayed inside fileDir. The blob name is not route-controlled data: the consumer enumerates the container in BlobConsumer.createBatchExchangesFromContainer, which lists blobs and creates one exchange per entry from BlobItem.getName() verbatim, applying no name filtering by default. A blob name containing parent-directory segments therefore resolved to a location outside the configured fileDir, letting anyone able to influence the names present in the consumed container cause Camel to create or overwrite a file at a location of their choosing, with the privileges of the Camel process. Depending on what the process can write to, overwriting a file outside the download directory can escalate beyond the loss of integrity of that file. Azure Storage blob containers use a flat namespace in which the blob name is an opaque key, so a name carrying such segments is stored and listed as given. The fileDir option is an ordinary common-group configuration parameter and carries no security marker, so nothing signalled to users that its value was not being enforced as a containment boundary. Camel's other file-download consumers - camel-file, camel-ftp, camel-smb, camel-mina-sftp and camel-azure-files - already constrained their local downloads to the configured directory using a path-segment boundary check; the camel-azure-storage-blob download path was not covered by that work. Users are recommended to upgrade to version 4.22.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.9. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.4. For deployments that cannot upgrade immediately, constrain the names the consumer will act on using the regex endpoint option, which is applied to each listed blob name as a full-string match, so that only simple single-segment names are accepted and any name carrying a path separator or a parent-directory segment is filtered out before an exchange is created; the prefix option can additionally narrow the listing server-side, noting that when both are set regex takes priority and prefix is ignored. Alternatively, avoid the downloadBlobToFile operation on untrusted containers and write the payload from the route under a file name the route itself controls, rather than one taken from the remote listing. As defence in depth, treat the blob names in any externally writable container as untrusted input and do not derive local filesystem paths from them.CVE-2026-27172apache software foundationapache camel+25mo ago27-04-2026 09:59

The ConsulRegistry in the camel-consul component (class org.apache.camel.component.consul.ConsulRegistry and its inner ConsulRegistryUtils.deserialize method) read Java-serialized values from the Consul KV store and passed them to ObjectInputStream.readObject() without configuring an ObjectInputFilter. An attacker who can write to the Consul KV store backing a Camel ConsulRegistry instance could inject a malicious serialized Java object that is deserialized the next time Camel performs a lookup against that registry, leading to arbitrary code execution in the Camel process. The issue mirrors the class of vulnerability already addressed for other Camel components in CVE-2024-22369, CVE-2024-23114 and CVE-2026-25747, and was overlooked during the original remediation of those CVEs. This issue affects Apache Camel: from 3.0.0 before 4.14.6, from 4.15.0 before 4.18.1. Users are recommended to upgrade to version 4.19.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.6. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.1.CVE-2026-46457apache software foundationapache camel+23mo ago06-07-2026 07:57

Improper Input Validation vulnerability in Apache Camel NATS component. The camel-nats component maps inbound NATS message headers into the Camel Exchange but defaulted its headerFilterStrategy to a bare new DefaultHeaderFilterStrategy() with no inbound rules configured (NatsConfiguration). With no inFilter, inFilterPattern or inFilterStartsWith set, DefaultHeaderFilterStrategy.applyFilterToExternalHeaders returns not filtered for every header name, so NatsConsumer copies every NATS message header - including Camel-internal control headers such as CamelHttpUri, CamelFileName or CamelSqlQuery - unmodified onto the Camel message. A client able to publish to the consumed NATS subject can therefore inject arbitrary Camel control headers that influence the behaviour of downstream producers in the route (for example redirecting an HTTP producer, changing a file name, or overriding a query); the injected headers also persist across internal direct, seda and vm hops. The concrete downstream impact depends on which producers the route uses. NATS message headers require NATS 2.2 or later, and the issue is reachable without credentials when the NATS server is configured without authentication (the NATS server default). This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0. Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. The fix makes camel-nats default to a dedicated NatsHeaderFilterStrategy that filters the Camel header namespace case-insensitively on inbound mapping, so client-supplied Camel* / camel* headers are no longer copied into the Exchange. For deployments that cannot upgrade immediately, strip the Camel control headers from inbound NATS messages before they reach any downstream producer (for example removeHeaders('Camel*') and removeHeaders('camel*') at the start of the route), and enable authentication on the NATS server so that only trusted clients can publish to the consumed subject.CVE-2026-46456apache software foundationapache camel+23mo ago06-07-2026 07:56

Improper Input Validation vulnerability in Apache Camel AWS2-SQS Component. The camel-aws2-sqs component map inbound message attributes into the Camel Exchange through a component-specific HeaderFilterStrategy. Sqs2HeaderFilterStrategy configured only an outbound filter (setOutFilterPattern, which blocks Camel*, breadcrumbId and org.apache.camel.* headers being written to the broker) but did not configure an inbound filter. As a result, when Sqs2Consumer copies each SQS MessageAttribute into the Exchange via HeaderFilterStrategy.applyFilterToExternalHeaders, DefaultHeaderFilterStrategy applied no inbound rule and treated every header name as not filtered - including Camel-internal control headers such as CamelHttpUri, CamelFileName or CamelSqlQuery - copying them unmodified onto the Camel message. Any principal able to send messages to the consumed SQS queue (for example a cross-account sender or a lower-privileged in-account component holding sqs:SendMessage) could therefore set arbitrary Camel control headers that influence the behaviour of downstream producers in the route (for example redirecting an HTTP producer, changing a file name, or overriding a query); the injected headers also persist across internal direct, seda and vm hops. The concrete downstream impact depends on which producers the route uses. This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0. Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. The fix adds an inbound HeaderFilterStrategy rule to Sqs2HeaderFilterStrategy that filters the Camel header namespace case-insensitively on inbound mapping, so sender-supplied Camel* / camel* headers are no longer copied into the Exchange. For deployments that cannot upgrade immediately, strip the Camel control headers from inbound messages before they reach any downstream producer (for example removeHeaders('Camel*') and removeHeaders('camel*') at the start of the route), and restrict who may send to the consumed SQS queue by applying least-privilege sqs:SendMessage permissions on the queue resource policy.