Cilium vulnerabilities
39 vulnerabilities
Known vulnerabilities in Cilium products, newest first, with CVSS severity, EPSS, KEV listings and ransomware use, across 4 products.
Products
4- Cilium36 vulnerabilities
- Cilium Cli1 vulnerabilities
- Ebpf1 vulnerabilities
- Hubble1 vulnerabilities
CVE-2025-48056ciliumhubble+1
EPSS score0.29%
Hubble is a fully distributed networking and security observability platform for cloud native workloads. Prior to version 1.17.2, a network attacker could inject malicious control characters into Hubble CLI terminal output, potentially leading to loss of integrity and manipulation of the output. This could be leveraged to conceal log entries, rewrite output, or even make the terminal temporarily unusable. Exploitation of this attack would require the victim to be monitoring Kafka traffic using Layer 7 Protocol Visibility at the time of the attack. The issue is patched in Hubble CLI v1.17.2. Hubble CLI users who are unable to upgrade can direct their Hubble flows to a log file and inspect the output within a text editor.CVE-2025-64715chainguardcilium-1.15+18EPSS score0.17%
Cilium is a networking, observability, and security solution with an eBPF-based dataplane. Prior to versions 1.16.17, 1.17.10, and 1.18.4, CiliumNetworkPolicys which use egress.toGroups.aws.securityGroupsIds to reference AWS security group IDs that do not exist or are not attached to any network interface may unintentionally allow broader outbound access than intended by the policy authors. In such cases, the toCIDRset section of the derived policy is not generated, which means outbound traffic may be permitted to more destinations than originally intended. This issue has been patched in versions 1.16.17, 1.17.10, and 1.18.4. There are no workarounds for this issue.CVE-2025-32793chainguardhubble+8EPSS score0.14%
Cilium is a networking, observability, and security solution with an eBPF-based dataplane. Versions 1.15.0 to 1.15.15, 1.16.0 to 1.16.8, and 1.17.0 to 1.17.2, are vulnerable when using Wireguard transparent encryption in a Cilium cluster, packets that originate from a terminating endpoint can leave the source node without encryption due to a race condition in how traffic is processed by Cilium. This issue has been patched in versions 1.15.16, 1.16.9, and 1.17.3. There are no workarounds available for this issue.CVE-2025-30162chainguardhubble+11EPSS score0.22%
Cilium is a networking, observability, and security solution with an eBPF-based dataplane. For Cilium users who use Gateway API for Ingress for some services and use LB-IPAM or BGP for LB Service implementation and use network policies to block egress traffic from workloads in a namespace to workloads in other namespaces, egress traffic from workloads covered by such network policies to LoadBalancers configured by `Gateway` resources will incorrectly be allowed. LoadBalancer resources not deployed via a Gateway API configuration are not affected by this issue. This issue affects: Cilium v1.15 between v1.15.0 and v1.15.14 inclusive, v1.16 between v1.16.0 and v1.16.7 inclusive, and v1.17 between v1.17.0 and v1.17.1 inclusive. This issue is fixed in Cilium v1.15.15, v1.16.8, and v1.17.2. A Clusterwide Cilium Network Policy can be used to work around this issue for users who are unable to upgrade.CVE-2025-30163ciliumcilium+1EPSS score0.21%
Cilium is a networking, observability, and security solution with an eBPF-based dataplane. Node based network policies (`fromNodes` and `toNodes`) will incorrectly permit traffic to/from non-node endpoints that share the labels specified in `fromNodes` and `toNodes` sections of network policies. Node based network policy is disabled by default in Cilium. This issue affects: Cilium v1.16 between v1.16.0 and v1.16.7 inclusive and v1.17 between v1.17.0 and v1.17.1 inclusive. This issue is fixed in Cilium v1.16.8 and v1.17.2. Users can work around this issue by ensuring that the labels used in `fromNodes` and `toNodes` fields are used exclusively by nodes and not by other endpoints.CVE-2025-23028chainguardcilium-1.15+7EPSS score0.43%
Cilium is a networking, observability, and security solution with an eBPF-based dataplane. A denial of service vulnerability affects versions 1.14.0 through 1.14.7, 1.15.0 through 1.15.11, and 1.16.0 through 1.16.4. In a Kubernetes cluster where Cilium is configured to proxy DNS traffic, an attacker can crash Cilium agents by sending a crafted DNS response to workloads from outside the cluster. For traffic that is allowed but without using DNS-based policy, the dataplane will continue to pass traffic as configured at the time of the DoS. For workloads that have DNS-based policy configured, existing connections may continue to operate, and new connections made without relying on DNS resolution may continue to be established, but new connections which rely on DNS resolution may be disrupted. Any configuration changes that affect the impacted agent may not be applied until the agent is able to restart. This issue is fixed in Cilium v1.14.18, v1.15.12, and v1.16.5. No known workarounds are available.CVE-2025-23047chainguardcilium-1.15+13EPSS score0.50%
Cilium is a networking, observability, and security solution with an eBPF-based dataplane. An insecure default `Access-Control-Allow-Origin` header value could lead to sensitive data exposure for users of Cilium versions 1.14.0 through 1.14.7, 1.15.0 through 1.15.11, and 1.16.0 through 1.16.4 who deploy Hubble UI using either Cilium CLI or via the Cilium Helm chart. A user with access to a Hubble UI instance affected by this issue could leak configuration details about the Kubernetes cluster which Hubble UI is monitoring, including node names, IP addresses, and other metadata about workloads and the cluster networking configuration. In order for this vulnerability to be exploited, a victim would have to first visit a malicious page. This issue is fixed in Cilium v1.14.18, v1.15.12, and v1.16.5. As a workaround, users who deploy Hubble UI using the Cilium Helm chart directly can remove the CORS headers from the Helm template as shown in the patch from commit a3489f190ba6e87b5336ee685fb6c80b1270d06d.CVE-2022-29178chainguardcilium-1.15+18EPSS score0.29%
Cilium is open source software for providing and securing network connectivity and loadbalancing between application workloads. Cilium prior to versions 1.9.16, 1.10.11, and 1.11.15 contains an incorrect default permissions vulnerability. Operating Systems with users belonging to the group ID 1000 can access the API of Cilium via Unix domain socket available on the host where Cilium is running. This could allow malicious users to compromise integrity as well as system availability on that host. The problem has been fixed and the patch is available in versions 1.9.16, 1.10.11, and 1.11.5. A potential workaround is to modify Cilium's DaemonSet to run with a certain command, which can be found in the GitHub Security Advisory for this vulnerability.CVE-2022-29179chainguardcilium-1.15+18EPSS score0.36%
Cilium is open source software for providing and securing network connectivity and loadbalancing between application workloads. Prior to versions 1.9.16, 1.10.11, and 1.11.15, if an attacker is able to perform a container escape of a container running as root on a host where Cilium is installed, the attacker can escalate privileges to cluster admin by using Cilium's Kubernetes service account. The problem has been fixed and the patch is available in versions 1.9.16, 1.10.11, and 1.11.5. There are no known workarounds available.CVE-2024-52529chainguardcilium-1.16+21EPSS score0.52%
Cilium is a networking, observability, and security solution with an eBPF-based dataplane. For users with the following configuration: 1. An allow policy that selects a Layer 3 destination and a port range `AND` 2. A Layer 7 allow policy that selects a specific port within the first policy's range the Layer 7 enforcement would not occur for the traffic selected by the Layer 7 policy. This issue only affects users who use Cilium's port range functionality, which was introduced in Cilium v1.16. This issue is patched in PR #35150. This issue affects Cilium v1.16 between v1.16.0 and v1.16.3 inclusive. This issue is patched in Cilium v1.16.4. Users are advised to upgrade. Users with network policies that match the pattern described above can work around the issue by rewriting any policies that use port ranges to individually specify the ports permitted for traffic.CVE-2024-47825chainguardcilium-1.15+23EPSS score0.40%
Cilium is a networking, observability, and security solution with an eBPF-based dataplane. Starting in version 1.14.0 and prior to versions 1.14.16 and 1.15.10, a policy rule denying a prefix that is broader than `/32` may be ignored if there is a policy rule referencing a more narrow prefix (`CIDRSet` or `toFQDN`) and this narrower policy rule specifies either `enableDefaultDeny: false` or `- toEntities: all`. Note that a rule specifying `toEntities: world` or `toEntities: 0.0.0.0/0` is insufficient, it must be to entity `all`.This issue has been patched in Cilium v1.14.16 and v1.15.10. As this issue only affects policies using `enableDefaultDeny: false` or that set `toEntities` to `all`, some workarounds are available. For users with policies using `enableDefaultDeny: false`, remove this configuration option and explicitly define any allow rules required. For users with egress policies that explicitly specify `toEntities: all`, use `toEntities: world`.CVE-2024-42487chainguardcilium-1.15+41EPSS score0.53%
Cilium is a networking, observability, and security solution with an eBPF-based dataplane. In the 1.15 branch prior to 1.15.8 and the 1.16 branch prior to 1.16.1, Gateway API HTTPRoutes and GRPCRoutes do not follow the match precedence specified in the Gateway API specification. In particular, request headers are matched before request methods, when the specification describes that the request methods must be respected before headers are matched. This could result in unexpected behaviour with security This issue is fixed in Cilium v1.15.8 and v1.16.1. There is no workaround for this issue.CVE-2024-42488chainguardcilium-1.15+25EPSS score0.50%
Cilium is a networking, observability, and security solution with an eBPF-based dataplane. Prior to versions 1.14.14 and 1.15.8, a race condition in the Cilium agent can cause the agent to ignore labels that should be applied to a node. This could in turn cause CiliumClusterwideNetworkPolicies intended for nodes with the ignored label to not apply, leading to policy bypass. This issue has been patched in Cilium v1.14.14 and v1.15.8 As the underlying issue depends on a race condition, users unable to upgrade can restart the Cilium agent on affected nodes until the affected policies are confirmed to be working as expected.CVE-2024-42486chainguardcilium-1.15+36EPSS score0.57%
Cilium is a networking, observability, and security solution with an eBPF-based dataplane. In versions on the 1.15.x branch prior to 1.15.8 and the 1.16.x branch prior to 1.16.1, ReferenceGrant changes are not correctly propagated in Cilium's GatewayAPI controller, which could lead to Gateway resources being able to access secrets for longer than intended, or to Routes having the ability to forward traffic to backends in other namespaces for longer than intended. This issue has been patched in Cilium v1.15.8 and v1.16.1. As a workaround, any modification of a related Gateway/HTTPRoute/GRPCRoute/TCPRoute CRD (for example, adding any label to any of these resources) will trigger a reconciliation of ReferenceGrants on an affected cluster.CVE-2024-25631chainguardcilium-1.15+23EPSS score0.20%
Cilium is a networking, observability, and security solution with an eBPF-based dataplane. For Cilium users who have enabled an external kvstore and Wireguard transparent encryption, traffic between pods in the affected cluster is not encrypted. This issue affects Cilium v1.14 before v1.14.7 and has been patched in Cilium v1.14.7. There is no workaround to this issue.CVE-2024-25630chainguardcilium-1.15+23EPSS score0.18%
Cilium is a networking, observability, and security solution with an eBPF-based dataplane. For Cilium users who are using CRDs to store Cilium state (the default configuration) and Wireguard transparent encryption, traffic to/from the Ingress and health endpoints is not encrypted. This issue affects Cilium v1.14 before v1.14.7 and has been patched in Cilium v1.14.7. There is no workaround to this issue.CVE-2024-37307chainguardcilium-1.15+14EPSS score0.18%
Cilium is a networking, observability, and security solution with an eBPF-based dataplane. Starting in version 1.13.0 and prior to versions 1.13.7, 1.14.12, and 1.15.6, the output of `cilium-bugtool` can contain sensitive data when the tool is run (with the `--envoy-dump` flag set) against Cilium deployments with the Envoy proxy enabled. Users of the TLS inspection, Ingress with TLS termination, Gateway API with TLS termination, and Kafka network policies with API key filtering features are affected. The sensitive data includes the CA certificate, certificate chain, and private key used by Cilium HTTP Network Policies, and when using Ingress/Gateway API and the API keys used in Kafka-related network policy. `cilium-bugtool` is a debugging tool that is typically invoked manually and does not run during the normal operation of a Cilium cluster. This issue has been patched in Cilium v1.15.6, v1.14.12, and v1.13.17. There is no workaround to this issue.CVE-2024-28250chainguardhubble-ui+6EPSS score0.17%
Cilium is a networking, observability, and security solution with an eBPF-based dataplane. Starting in version 1.14.0 and prior to versions 1.14.8 and 1.15.2, In Cilium clusters with WireGuard enabled and traffic matching Layer 7 policies Wireguard-eligible traffic that is sent between a node's Envoy proxy and pods on other nodes is sent unencrypted and Wireguard-eligible traffic that is sent between a node's DNS proxy and pods on other nodes is sent unencrypted. This issue has been resolved in Cilium 1.14.8 and 1.15.2 in in native routing mode (`routingMode=native`) and in Cilium 1.14.4 in tunneling mode (`routingMode=tunnel`). Not that in tunneling mode, `encryption.wireguard.encapsulate` must be set to `true`. There is no known workaround for this issue.CVE-2024-28248chainguardhubble-ui+6EPSS score0.62%
Cilium is a networking, observability, and security solution with an eBPF-based dataplane. Starting in version 1.13.9 and prior to versions 1.13.13, 1.14.8, and 1.15.2, Cilium's HTTP policies are not consistently applied to all traffic in the scope of the policies, leading to HTTP traffic being incorrectly and intermittently forwarded when it should be dropped. This issue has been patched in Cilium 1.15.2, 1.14.8, and 1.13.13. There are no known workarounds for this issue.CVE-2024-28249chainguardcilium-1.15+23EPSS score0.27%
Cilium is a networking, observability, and security solution with an eBPF-based dataplane. Prior to versions 1.13.13, 1.14.8, and 1.15.2, in Cilium clusters with IPsec enabled and traffic matching Layer 7 policies, IPsec-eligible traffic between a node's Envoy proxy and pods on other nodes is sent unencrypted and IPsec-eligible traffic between a node's DNS proxy and pods on other nodes is sent unencrypted. This issue has been resolved in Cilium 1.15.2, 1.14.8, and 1.13.13. There is no known workaround for this issue.