Cisco Asa 5500 vulnerabilities
15 vulnerabilities
Known vulnerabilities in Cisco Asa 5500, newest first, with CVSS severity, EPSS, KEV listings, ransomware use and the affected versions.
CVE-2013-0149ciscoasa_5500_firmware+5
EPSS score2.47%
The OSPF implementation in Cisco IOS 12.0 through 12.4 and 15.0 through 15.3, IOS-XE 2.x through 3.9.xS, ASA and PIX 7.x through 9.1, FWSM, NX-OS, and StarOS before 14.0.50488 does not properly validate Link State Advertisement (LSA) type 1 packets before performing operations on the LSA database, which allows remote attackers to cause a denial of service (routing disruption) or obtain sensitive packet information via a (1) unicast or (2) multicast packet, aka Bug IDs CSCug34485, CSCug34469, CSCug39762, CSCug63304, and CSCug39795.CVE-2007-0961ciscoasa_5500_firmware+1EPSS score3.34%
Cisco PIX 500 and ASA 5500 Series Security Appliances 6.x before 6.3(5.115), 7.0 before 7.0(5.2), and 7.1 before 7.1(2.5), and the FWSM 3.x before 3.1(3.24), when the "inspect sip" option is enabled, allows remote attackers to cause a denial of service (device reboot) via malformed SIP packets.CVE-2007-0959ciscoasa_5500_firmware+1EPSS score2.37%
Cisco PIX 500 and ASA 5500 Series Security Appliances 7.2.2, when configured to inspect certain TCP-based protocols, allows remote attackers to cause a denial of service (device reboot) via malformed TCP packets.CVE-2007-0960ciscoasa_5500_firmware+1EPSS score2.64%
Unspecified vulnerability in Cisco PIX 500 and ASA 5500 Series Security Appliances 7.2.2, when configured to use the LOCAL authentication method, allows remote authenticated users to gain privileges via unspecified vectors.CVE-2007-0962ciscoasa_5500_firmware+2EPSS score2.43%
Cisco PIX 500 and ASA 5500 Series Security Appliances 7.0 before 7.0(4.14) and 7.1 before 7.1(2.1), and the FWSM 2.x before 2.3(4.12) and 3.x before 3.1(3.24), when "inspect http" is enabled, allows remote attackers to cause a denial of service (device reboot) via malformed HTTP traffic.CVE-2011-2054ciscoasa_5500_firmware+13EPSS score0.86%
A vulnerability in the Cisco ASA that could allow a remote attacker to successfully authenticate using the Cisco AnyConnect VPN client if the Secondary Authentication type is LDAP and the password is left blank, providing the primary credentials are correct. The vulnerabilities is due to improper input validation of certain parameters passed to the affected software. An attacker must have the correct primary credentials in order to successfully exploit this vulnerability.CVE-2010-0569ciscoasa_5500_firmwareEPSS score3.03%
Unspecified vulnerability in Cisco ASA 5500 Series Adaptive Security Appliance 7.0 before 7.0(8.10), 7.2 before 7.2(4.45), 8.0 before 8.0(5.2), 8.1 before 8.1(2.37), and 8.2 before 8.2(1.16); and Cisco PIX 500 Series Security Appliance; allows remote attackers to cause a denial of service (device reload) via malformed SIP messages, aka Bug ID CSCtc96018.CVE-2010-0149ciscoasa_5500_firmwareEPSS score4.16%
Unspecified vulnerability in Cisco ASA 5500 Series Adaptive Security Appliance 7.2 before 7.2(4.46), 8.0 before 8.0(4.38), 8.1 before 8.1(2.29), and 8.2 before 8.2(1.5); and Cisco PIX 500 Series Security Appliance; allows remote attackers to cause a denial of service (prevention of new connections) via crafted TCP segments during termination of the TCP connection that cause the connection to remain in CLOSEWAIT status, aka "TCP Connection Exhaustion Denial of Service Vulnerability."CVE-2010-0150ciscoasa_5500_firmwareEPSS score3.03%
Unspecified vulnerability in Cisco ASA 5500 Series Adaptive Security Appliance 7.0 before 7.0(8.10), 7.2 before 7.2(4.45), 8.0 before 8.0(5.2), 8.1 before 8.1(2.37), and 8.2 before 8.2(1.16); and Cisco PIX 500 Series Security Appliance; allows remote attackers to cause a denial of service (device reload) via malformed SIP messages, aka Bug ID CSCsy91157.CVE-2010-0565ciscoasa_5500_firmwareEPSS score3.03%
Unspecified vulnerability in Cisco ASA 5500 Series Adaptive Security Appliance 7.2 before 7.2(4.45), 8.0 before 8.0(4.44), 8.1 before 8.1(2.35), and 8.2 before 8.2(1.10), allows remote attackers to cause a denial of service (page fault and device reload) via a malformed DTLS message, aka Bug ID CSCtb64913 and "WebVPN DTLS Denial of Service Vulnerability."CVE-2010-0566ciscoasa_5500_firmwareEPSS score2.52%
Unspecified vulnerability in Cisco ASA 5500 Series Adaptive Security Appliance 7.0 before 7.0(8.10), 7.2 before 7.2(4.45), 8.0 before 8.0(4.44), 8.1 before 8.1(2.35), and 8.2 before 8.2(1.10) allows remote attackers to cause a denial of service (device reload) via a malformed TCP segment when certain NAT translation and Cisco AIP-SSM configurations are used, aka Bug ID CSCtb37219.CVE-2010-0568ciscoasa_5500_firmwareEPSS score2.55%
Unspecified vulnerability in Cisco ASA 5500 Series Adaptive Security Appliance 7.0 before 7.0(8.10), 7.2 before 7.2(4.45), 8.0 before 8.0(5.7), 8.1 before 8.1(2.40), and 8.2 before 8.2(2.1); and Cisco PIX 500 Series Security Appliance; allows remote attackers to bypass NTLMv1 authentication via a crafted username, aka Bug ID CSCte21953.CVE-2010-0567ciscoasa_5500_firmwareEPSS score2.67%
Unspecified vulnerability in Cisco ASA 5500 Series Adaptive Security Appliance 7.0 before 7.0(8.10), 7.2 before 7.2(4.45), 8.0 before 8.0(5.1), 8.1 before 8.1(2.37), and 8.2 before 8.2(1.15); and Cisco PIX 500 Series Security Appliance; allows remote attackers to cause a denial of service (active IPsec tunnel loss and prevention of new tunnels) via a malformed IKE message through an existing tunnel to UDP port 4500, aka Bug ID CSCtc47782.CVE-2019-1649cisco15454-m-wse-k9_firmware+22EPSS score0.61%
A vulnerability in the logic that handles access control to one of the hardware components in Cisco's proprietary Secure Boot implementation could allow an authenticated, local attacker to write a modified firmware image to the component. This vulnerability affects multiple Cisco products that support hardware-based Secure Boot functionality. The vulnerability is due to an improper check on the area of code that manages on-premise updates to a Field Programmable Gate Array (FPGA) part of the Secure Boot hardware implementation. An attacker with elevated privileges and access to the underlying operating system that is running on the affected device could exploit this vulnerability by writing a modified firmware image to the FPGA. A successful exploit could either cause the device to become unusable (and require a hardware replacement) or allow tampering with the Secure Boot verification process, which under some circumstances may allow the attacker to install and boot a malicious software image. An attacker will need to fulfill all the following conditions to attempt to exploit this vulnerability: Have privileged administrative access to the device. Be able to access the underlying operating system running on the device; this can be achieved either by using a supported, documented mechanism or by exploiting another vulnerability that would provide an attacker with such access. Develop or have access to a platform-specific exploit. An attacker attempting to exploit this vulnerability across multiple affected platforms would need to research each one of those platforms and then develop a platform-specific exploit. Although the research process could be reused across different platforms, an exploit developed for a given hardware platform is unlikely to work on a different hardware platform.CVE-2006-3073ciscoasa_5500_firmware+1EPSS score1.73%
Multiple cross-site scripting (XSS) vulnerabilities in the WebVPN feature in the Cisco VPN 3000 Series Concentrators and Cisco ASA 5500 Series Adaptive Security Appliances (ASA), when in WebVPN clientless mode, allow remote attackers to inject arbitrary web script or HTML via the domain parameter in (1) dnserror.html and (2) connecterror.html, aka bugid CSCsd81095 (VPN3k) and CSCse48193 (ASA). NOTE: the vendor states that "WebVPN full-network-access mode" is not affected, despite the claims by the original researcher.