Cisco IOS XE Software vulnerabilities

248 vulnerabilities

Known vulnerabilities in Cisco IOS XE Software, newest first, with CVSS severity, EPSS, KEV listings, ransomware use and the affected versions.

6.1CVE-2018-0480ciscocisco ios xe software+1
EPSS score
0.52%
A vulnerability in the errdisable per VLAN feature of Cisco IOS XE Software could allow an unauthenticated, adjacent attacker to cause the device to crash, leading to a denial of service (DoS) condition. The vulnerability is due to a race condition that occurs when the VLAN and port enter an errdisabled state, resulting in an incorrect state in the software. An attacker could exploit this vulnerability by sending frames that trigger the errdisable condition. A successful exploit could allow the attacker to cause the affected device to crash, leading to a DoS condition.7.1CVE-2018-0476ciscocisco ios xe software+1
EPSS score
13.70%
A vulnerability in the Network Address Translation (NAT) Session Initiation Protocol (SIP) Application Layer Gateway (ALG) of Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause an affected device to reload. The vulnerability is due to improper processing of SIP packets in transit while NAT is performed on an affected device. An unauthenticated, remote attacker could exploit this vulnerability by sending crafted SIP packets via UDP port 5060 through an affected device that is performing NAT for SIP packets. A successful exploit could allow an attacker to cause the device to reload, resulting in a denial of service (DoS) condition.7.4CVE-2018-0471ciscocisco ios xe software+1
EPSS score
0.85%
A vulnerability in the Cisco Discovery Protocol (CDP) module of Cisco IOS XE Software Releases 16.6.1 and 16.6.2 could allow an unauthenticated, adjacent attacker to cause a memory leak that may lead to a denial of service (DoS) condition. The vulnerability is due to incorrect processing of certain CDP packets. An attacker could exploit this vulnerability by sending certain CDP packets to an affected device. A successful exploit could cause an affected device to continuously consume memory and eventually result in a memory allocation failure that leads to a crash, triggering a reload of the affected device.7.2CVE-2018-0477ciscocisco ios xe software+1
EPSS score
0.49%
A vulnerability in the CLI parser of Cisco IOS XE Software could allow an authenticated, local attacker to execute commands on the underlying Linux shell of an affected device with root privileges. The vulnerability exist because the affected software improperly sanitizes command arguments, failing to prevent access to certain internal data structures on an affected device. An attacker who has privileged EXEC mode (privilege level 15) access to an affected device could exploit these vulnerabilities on the device by executing CLI commands that contain custom arguments. A successful exploit could allow the attacker to execute arbitrary commands with root privileges on the affected device.8.6CVE-2018-0470ciscocisco ios xe software+1
EPSS score
4.40%
A vulnerability in the web framework of Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause a buffer overflow condition on an affected device, resulting in a denial of service (DoS) condition. The vulnerability is due to the affected software improperly parsing malformed HTTP packets that are destined to a device. An attacker could exploit this vulnerability by sending a malformed HTTP packet to an affected device for processing. A successful exploit could allow the attacker to cause a buffer overflow condition on the affected device, resulting in a DoS condition.7.2CVE-2018-0481ciscocisco ios xe software+1
EPSS score
0.49%
A vulnerability in the CLI parser of Cisco IOS XE Software could allow an authenticated, local attacker to execute commands on the underlying Linux shell of an affected device with root privileges. The vulnerability exist because the affected software improperly sanitizes command arguments, failing to prevent access to certain internal data structures on an affected device. An attacker who has privileged EXEC mode (privilege level 15) access to an affected device could exploit these vulnerabilities on the device by executing CLI commands that contain custom arguments. A successful exploit could allow the attacker to execute arbitrary commands with root privileges on the affected device.7.1CVE-2018-0469ciscocisco ios xe software+1
EPSS score
3.08%
A vulnerability in the web user interface of Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause an affected device to reload. The vulnerability is due to a double-free-in-memory handling by the affected software when specific HTTP requests are processed. An attacker could exploit this vulnerability by sending specific HTTP requests to the web user interface of the affected software. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a denial of service (DoS) condition on an affected device. To exploit this vulnerability, the attacker must have access to the management interface of the affected software, which is typically connected to a restricted management network.8.1CVE-2018-15372ciscocisco ios xe software+1
EPSS score
0.75%
A vulnerability in the MACsec Key Agreement (MKA) using Extensible Authentication Protocol-Transport Layer Security (EAP-TLS) functionality of Cisco IOS XE Software could allow an unauthenticated, adjacent attacker to bypass authentication and pass traffic through a Layer 3 interface of an affected device. The vulnerability is due to a logic error in the affected software. An attacker could exploit this vulnerability by connecting to and passing traffic through a Layer 3 interface of an affected device, if the interface is configured for MACsec MKA using EAP-TLS and is running in access-session closed mode. A successful exploit could allow the attacker to bypass 802.1x network access controls and gain access to the network.7.2CVE-2018-15371ciscocisco ios xe software+1
EPSS score
0.40%
A vulnerability in the shell access request mechanism of Cisco IOS XE Software could allow an authenticated, local attacker to bypass authentication and gain unrestricted access to the root shell of an affected device. The vulnerability exists because the affected software has insufficient authentication mechanisms for certain commands. An attacker could exploit this vulnerability by requesting access to the root shell of an affected device, after the shell access feature has been enabled. A successful exploit could allow the attacker to bypass authentication and gain unrestricted access to the root shell of the affected device.7.2CVE-2018-15368ciscocisco ios xe software+1
EPSS score
0.39%
A vulnerability in the CLI parser of Cisco IOS XE Software could allow an authenticated, local attacker to gain access to the underlying Linux shell of an affected device and execute arbitrary commands with root privileges on the device. The vulnerability is due to the affected software improperly sanitizing command arguments to prevent modifications to the underlying Linux filesystem on a device. An attacker who has privileged EXEC mode (privilege level 15) access to an affected device could exploit this vulnerability on the device by executing CLI commands that contain crafted arguments. A successful exploit could allow the attacker to gain access to the underlying Linux shell of the affected device and execute arbitrary commands with root privileges on the device.7.2CVE-2018-15374ciscocisco ios xe software+1
EPSS score
0.24%
A vulnerability in the Image Verification feature of Cisco IOS XE Software could allow an authenticated, local attacker to install a malicious software image or file on an affected device. The vulnerability is due to the affected software improperly verifying digital signatures for software images and files that are uploaded to a device. An attacker could exploit this vulnerability by uploading a malicious software image or file to an affected device. A successful exploit could allow the attacker to bypass digital signature verification checks for software images and files and install a malicious software image or file on the affected device.7.2CVE-2021-1454ciscocisco ios xe software+2
EPSS score
0.29%
Multiple vulnerabilities in the CLI of Cisco IOS XE SD-WAN Software could allow an authenticated, local attacker to access the underlying operating system with root privileges. These vulnerabilities are due to insufficient input validation of certain CLI commands. An attacker could exploit these vulnerabilities by authenticating to the device and submitting crafted input to the CLI. The attacker must be authenticated as an administrative user to execute the affected commands. A successful exploit could allow the attacker to access the underlying operating system with root privileges.7.2CVE-2021-1382ciscocisco ios xe software+1
EPSS score
0.71%
A vulnerability in the CLI of Cisco IOS XE SD-WAN Software could allow an authenticated, local attacker to inject arbitrary commands to be executed with root privileges on the underlying operating system. This vulnerability is due to insufficient input validation on certain CLI commands. An attacker could exploit this vulnerability by authenticating to the device and submitting crafted input to the CLI. The attacker must be authenticated as an administrative user to execute the affected commands. A successful exploit could allow the attacker to execute commands with root privileges.7.2CVE-2021-1441ciscocisco ios xe software+1
EPSS score
0.32%
A vulnerability in the hardware initialization routines of Cisco IOS XE Software for Cisco 1100 Series Industrial Integrated Services Routers and Cisco ESR6300 Embedded Series Routers could allow an authenticated, local attacker to execute unsigned code at system boot time. This vulnerability is due to incorrect validations of parameters passed to a diagnostic script that is executed when the device boots up. An attacker could exploit this vulnerability by tampering with an executable file stored on a device. A successful exploit could allow the attacker to execute unsigned code at boot time and bypass the software image verification check part of the secure boot process of an affected device. To exploit this vulnerability, the attacker would need administrative level credentials (level 15) on the device.7.8CVE-2021-1431ciscocisco ios xe software+1
EPSS score
1.66%
A vulnerability in the vDaemon process of Cisco IOS XE SD-WAN Software could allow an unauthenticated, remote attacker to cause a device to reload, resulting a denial of service (DoS) condition. This vulnerability is due to insufficient handling of malformed packets. An attacker could exploit this vulnerability by sending crafted traffic to an affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition.7.2CVE-2021-1375ciscocisco ios xe software+1
EPSS score
0.24%
Multiple vulnerabilities in the fast reload feature of Cisco IOS XE Software running on Cisco Catalyst 3850, Cisco Catalyst 9300, and Cisco Catalyst 9300L Series Switches could allow an authenticated, local attacker to either execute arbitrary code on the underlying operating system, install and boot a malicious software image, or execute unsigned binaries on an affected device. These vulnerabilities are due to improper checks performed by system boot routines. To exploit these vulnerabilities, the attacker would need privileged access to the CLI of the device. A successful exploit could allow the attacker to either execute arbitrary code on the underlying operating system or execute unsigned code and bypass the image verification check part of the secure boot process. For more information about these vulnerabilities, see the Details section of this advisory.6.1CVE-2021-1381ciscocisco ios xe software+1
EPSS score
0.28%
A vulnerability in Cisco IOS XE Software could allow an authenticated, local attacker with high privileges or an unauthenticated attacker with physical access to the device to open a debugging console. The vulnerability is due to insufficient command authorization restrictions. An attacker could exploit this vulnerability by running commands on the hardware platform to open a debugging console. A successful exploit could allow the attacker to access a debugging console.6.9CVE-2021-1281ciscocisco ios xe software+1
EPSS score
0.29%
A vulnerability in CLI management in Cisco IOS XE SD-WAN Software could allow an authenticated, local attacker to access the underlying operating system as the root user. This vulnerability is due to the way the software handles concurrent CLI sessions. An attacker could exploit this vulnerability by authenticating to the device as an administrative user and executing a sequence of commands. A successful exploit could allow the attacker to obtain access to the underlying operating system as the root user.7.7CVE-2021-1623ciscocisco ios xe software+1
EPSS score
1.10%
A vulnerability in the Simple Network Management Protocol (SNMP) punt handling function of Cisco cBR-8 Converged Broadband Routers could allow an authenticated, remote attacker to overload a device punt path, resulting in a denial of service (DoS) condition. This vulnerability is due to the punt path being overwhelmed by large quantities of SNMP requests. An attacker could exploit this vulnerability by sending a large number of SNMP requests to an affected device. A successful exploit could allow the attacker to overload the device punt path, resulting in a DoS condition.7.2CVE-2021-1453ciscocisco ios xe software+1
EPSS score
0.23%
A vulnerability in the software image verification functionality of Cisco IOS XE Software for the Cisco Catalyst 9000 Family of switches could allow an unauthenticated, physical attacker to execute unsigned code at system boot time. The vulnerability is due to an improper check in the code function that manages the verification of the digital signatures of system image files during the initial boot process. An attacker could exploit this vulnerability by loading unsigned software on an affected device. A successful exploit could allow the attacker to boot a malicious software image or execute unsigned code and bypass the image verification check part of the secure boot process of an affected device. To exploit this vulnerability, the attacker would need to have unauthenticated physical access to the device or obtain privileged access to the root shell on the device.