Cisco IOS XR Software vulnerabilities, page 3

114 vulnerabilities

Known vulnerabilities in Cisco IOS XR Software, newest first, with CVSS severity, EPSS, KEV listings, ransomware use and the affected versions.

8.8CVE-2020-3118ciscocisco ios xr software+1KEV
EPSS score
11.68%
A vulnerability in the Cisco Discovery Protocol implementation for Cisco IOS XR Software could allow an unauthenticated, adjacent attacker to execute arbitrary code or cause a reload on an affected device. The vulnerability is due to improper validation of string input from certain fields in Cisco Discovery Protocol messages. An attacker could exploit this vulnerability by sending a malicious Cisco Discovery Protocol packet to an affected device. A successful exploit could allow the attacker to cause a stack overflow, which could allow the attacker to execute arbitrary code with administrative privileges on an affected device. Cisco Discovery Protocol is a Layer 2 protocol. To exploit this vulnerability, an attacker must be in the same broadcast domain as the affected device (Layer 2 adjacent).7.8CVE-2020-3473ciscocisco ios xr software+1
EPSS score
0.38%
A vulnerability in task group assignment for a specific CLI command in Cisco IOS XR Software could allow an authenticated, local CLI shell user to elevate privileges and gain full administrative control of the device. The vulnerability is due to incorrect mapping of a command to task groups within the source code. An attacker could exploit this vulnerability by first authenticating to the local CLI shell on the device and using the CLI command to bypass the task group–based checks. A successful exploit could allow the attacker to elevate privileges and perform actions on the device without authorization checks.5.3CVE-2020-3364ciscocisco ios xr software+1
EPSS score
0.91%
A vulnerability in the access control list (ACL) functionality of the standby route processor management interface of Cisco IOS XR Software could allow an unauthenticated, remote attacker to reach the configured IP addresses on the standby route processor management Gigabit Ethernet Management interface. The vulnerability is due to a logic error that was introduced in the Cisco IOS XR Software, which prevents the ACL from working when applied against the standby route processor management interface. An attacker could exploit this vulnerability by attempting to access the device through the standby route processor management interface.8.8CVE-2020-3217ciscocisco ios xr software+3
EPSS score
1.09%
A vulnerability in the Topology Discovery Service of Cisco One Platform Kit (onePK) in Cisco IOS Software, Cisco IOS XE Software, Cisco IOS XR Software, and Cisco NX-OS Software could allow an unauthenticated, adjacent attacker to execute arbitrary code or cause a denial of service (DoS) condition on an affected device. The vulnerability is due to insufficient length restrictions when the onePK Topology Discovery Service parses Cisco Discovery Protocol messages. An attacker could exploit this vulnerability by sending a malicious Cisco Discovery Protocol message to an affected device. An exploit could allow the attacker to cause a stack overflow, which could allow the attacker to execute arbitrary code with administrative privileges, or to cause a process crash, which could result in a reload of the device and cause a DoS condition.4.3CVE-2020-3449ciscocisco ios xr software+1
EPSS score
1.06%
A vulnerability in the Border Gateway Protocol (BGP) additional paths feature of Cisco IOS XR Software could allow an unauthenticated, remote attacker to prevent authorized users from monitoring the BGP status and cause the BGP process to stop processing new updates, resulting in a denial of service (DOS) condition. The vulnerability is due to an incorrect calculation of lexicographical order when displaying additional path information within Cisco IOS XR Software, which causes an infinite loop. An attacker could exploit this vulnerability by sending a specific BGP update from a BGP neighbor peer session of an affected device; an authorized user must then issue a show bgp command for the vulnerability to be exploited. A successful exploit could allow the attacker to prevent authorized users from properly monitoring the BGP status and prevent BGP from processing new updates, resulting in outdated information in the routing and forwarding tables.8.4CVE-2020-3530ciscocisco ios xr software+1
EPSS score
0.28%
A vulnerability in task group assignment for a specific CLI command in Cisco IOS XR Software could allow an authenticated, local attacker to execute that command, even though administrative privileges should be required. The attacker must have valid credentials on the affected device. The vulnerability is due to incorrect mapping in the source code of task group assignments for a specific command. An attacker could exploit this vulnerability by issuing the command, which they should not be authorized to issue, on an affected device. A successful exploit could allow the attacker to invalidate the integrity of the disk and cause the device to restart. This vulnerability could allow a user with read permissions to issue a specific command that should require Administrator privileges.9.8CVE-2020-3284ciscoa99-rp2-se_firmware+44
EPSS score
2.89%
A vulnerability in the enhanced Preboot eXecution Environment (PXE) boot loader for Cisco IOS XR 64-bit Software could allow an unauthenticated, remote attacker to execute unsigned code during the PXE boot process on an affected device. The PXE boot loader is part of the BIOS and runs over the management interface of hardware platforms that are running Cisco IOS XR Software only. The vulnerability exists because internal commands that are issued when the PXE network boot process is loading a software image are not properly verified. An attacker could exploit this vulnerability by compromising the PXE boot server and replacing a valid software image with a malicious one. Alternatively, the attacker could impersonate the PXE boot server and send a PXE boot reply with a malicious file. A successful exploit could allow the attacker to execute unsigned code on the affected device. Note: To fix this vulnerability, both the Cisco IOS XR Software and the BIOS must be upgraded. The BIOS code is included in Cisco IOS XR Software but might require additional installation steps. For further information, see the Fixed Software section of this advisory.8.6CVE-2020-3569ciscocisco ios xr software+1KEV
EPSS score
3.32%
Multiple vulnerabilities in the Distance Vector Multicast Routing Protocol (DVMRP) feature of Cisco IOS XR Software could allow an unauthenticated, remote attacker to either immediately crash the Internet Group Management Protocol (IGMP) process or make it consume available memory and eventually crash. The memory consumption may negatively impact other processes that are running on the device. These vulnerabilities are due to the incorrect handling of IGMP packets. An attacker could exploit these vulnerabilities by sending crafted IGMP traffic to an affected device. A successful exploit could allow the attacker to immediately crash the IGMP process or cause memory exhaustion, resulting in other processes becoming unstable. These processes may include, but are not limited to, interior and exterior routing protocols. Cisco will release software updates that address these vulnerabilities.7.4CVE-2020-3120ciscocisco ios xr software+5
EPSS score
1.64%
A vulnerability in the Cisco Discovery Protocol implementation for Cisco FXOS Software, Cisco IOS XR Software, and Cisco NX-OS Software could allow an unauthenticated, adjacent attacker to cause a reload of an affected device, resulting in a denial of service (DoS) condition. The vulnerability is due to a missing check when the affected software processes Cisco Discovery Protocol messages. An attacker could exploit this vulnerability by sending a malicious Cisco Discovery Protocol packet to an affected device. A successful exploit could allow the attacker to exhaust system memory, causing the device to reload. Cisco Discovery Protocol is a Layer 2 protocol. To exploit this vulnerability, an attacker must be in the same broadcast domain as the affected device (Layer 2 adjacent).8.6CVE-2020-3566ciscocisco ios xr software+1KEV
EPSS score
3.70%
A vulnerability in the Distance Vector Multicast Routing Protocol (DVMRP) feature of Cisco IOS XR Software could allow an unauthenticated, remote attacker to exhaust process memory of an affected device. The vulnerability is due to insufficient queue management for Internet Group Management Protocol (IGMP) packets. An attacker could exploit this vulnerability by sending crafted IGMP traffic to an affected device. A successful exploit could allow the attacker to cause memory exhaustion, resulting in instability of other processes. These processes may include, but are not limited to, interior and exterior routing protocols. Cisco will release software updates that address this vulnerability.5.8CVE-2020-3190ciscocisco ios xr software+1
EPSS score
1.32%
A vulnerability in the IPsec packet processor of Cisco IOS XR Software could allow an unauthenticated remote attacker to cause a denial of service (DoS) condition for IPsec sessions to an affected device. The vulnerability is due to improper handling of packets by the IPsec packet processor. An attacker could exploit this vulnerability by sending malicious ICMP error messages to an affected device that get punted to the IPsec packet processor. A successful exploit could allow the attacker to deplete IPsec memory, resulting in all future IPsec packets to an affected device being dropped by the device. Manual intervention is required to recover from this situation.7.1CVE-2022-20758ciscocisco ios xr software+1
EPSS score
1.23%
A vulnerability in the implementation of the Border Gateway Protocol (BGP) Ethernet VPN (EVPN) functionality in Cisco IOS XR Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. This vulnerability is due to the incorrect processing of a BGP update message that contains specific EVPN attributes. An attacker could exploit this vulnerability by sending a BGP update message that contains specific EVPN attributes. To exploit this vulnerability, an attacker must control a BGP speaker that has an established trusted peer connection to an affected device that is configured with the address family L2VPN EVPN to receive and process the update message. This vulnerability cannot be exploited by any data that is initiated by clients on the Layer 2 network or by peers that are not configured to accept the L2VPN EVPN address family. A successful exploit could allow the attacker to cause the BGP process to restart unexpectedly, resulting in a DoS condition. The Cisco implementation of BGP accepts incoming BGP updates only from explicitly defined peers. For this vulnerability to be exploited, the malicious BGP update message must either come from a configured, valid BGP peer or be injected by the attacker into the affected BGP network on an existing, valid TCP connection to a BGP peer.4.3CVE-2022-20846ciscocisco ios xr software+1
EPSS score
1.00%
A vulnerability in the Cisco Discovery Protocol implementation for Cisco IOS XR Software could allow an unauthenticated, adjacent attacker to cause the Cisco Discovery Protocol process to reload on an affected device. This vulnerability is due to a heap buffer overflow in certain Cisco Discovery Protocol messages. An attacker could exploit this vulnerability by sending a malicious Cisco Discovery Protocol packet to an affected device. A successful exploit could allow the attacker to cause a heap overflow, which could cause the Cisco Discovery Protocol process to reload on the device. The bytes that can be written in the buffer overflow are restricted, which limits remote code execution.Note: Cisco Discovery Protocol is a Layer 2 protocol. To exploit this vulnerability, an attacker must be in the same broadcast domain as the affected device (Layer 2 adjacent).  Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability.This advisory is part of the September 2022 release of the Cisco IOS XR Software Security Advisory Bundled Publication. For a complete list of the advisories and links to them, see .6.1CVE-2022-20849ciscocisco ios xr software+1
EPSS score
0.28%
A vulnerability in the Broadband Network Gateway PPP over Ethernet (PPPoE) feature of Cisco IOS XR Software could allow an unauthenticated, adjacent attacker to cause the PPPoE process to continually crash. This vulnerability exists because the PPPoE feature does not properly handle an error condition within a specific crafted packet sequence. An attacker could exploit this vulnerability by sending a sequence of specific PPPoE packets from controlled customer premises equipment (CPE). A successful exploit could allow the attacker to cause the PPPoE process to continually restart, resulting in a denial of service condition (DoS).Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability.This advisory is part of the September 2022 release of the Cisco IOS XR Software Security Advisory Bundled Publication. For a complete list of the advisories and links to them, see .6CVE-2022-20845ciscocisco ios xr software
EPSS score
0.18%
A vulnerability in the TL1 function of Cisco Network Convergence System (NCS) 4000 Series could allow an authenticated, local attacker to cause a memory leak in the TL1 process. This vulnerability is due to TL1 not freeing memory under some conditions. An attacker could exploit this vulnerability by connecting to the device and issuing TL1 commands after being authenticated. A successful exploit could allow the attacker to cause the TL1 process to consume large amounts of memory. When the memory reaches a threshold, the Resource Monitor (Resmon) process will begin to restart or shutdown the top five consumers of memory, resulting in a denial of service (DoS).Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability.This advisory is part of the September 2022 release of the Cisco IOS XR Software Security Advisory Bundled Publication. For a complete list of the advisories and links to them, see .6.5CVE-2022-20821ciscocisco ios xr software+1KEV
EPSS score
11.47%
A vulnerability in the health check RPM of Cisco IOS XR Software could allow an unauthenticated, remote attacker to access the Redis instance that is running within the NOSi container. This vulnerability exists because the health check RPM opens TCP port 6379 by default upon activation. An attacker could exploit this vulnerability by connecting to the Redis instance on the open port. A successful exploit could allow the attacker to write to the Redis in-memory database, write arbitrary files to the container filesystem, and retrieve information about the Redis database. Given the configuration of the sandboxed container that the Redis instance runs in, a remote attacker would be unable to execute remote code or abuse the integrity of the Cisco IOS XR Software host system.8.8CVE-2022-20655ciscocisco carrier packet transport+9
EPSS score
0.83%
A vulnerability in the implementation of the CLI on a device that is running ConfD could allow an authenticated, local attacker to perform a command injection attack. The vulnerability is due to insufficient validation of a process argument on an affected device. An attacker could exploit this vulnerability by injecting commands during the execution of this process. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system with the privilege level of ConfD, which is commonly root.8.6CVE-2022-20714ciscocisco ios xr software+1
EPSS score
1.48%
A vulnerability in the data plane microcode of Lightspeed-Plus line cards for Cisco ASR 9000 Series Aggregation Services Routers could allow an unauthenticated, remote attacker to cause the line card to reset. This vulnerability is due to the incorrect handling of malformed packets that are received on the Lightspeed-Plus line cards. An attacker could exploit this vulnerability by sending a crafted IPv4 or IPv6 packet through an affected device. A successful exploit could allow the attacker to cause the Lightspeed-Plus line card to reset, resulting in a denial of service (DoS) condition for any traffic that traverses that line card.4.3CVE-2024-20319ciscocisco ios xr software+1
EPSS score
0.25%
A vulnerability in the UDP forwarding code of Cisco IOS XR Software could allow an unauthenticated, adjacent attacker to bypass configured management plane protection policies and access the Simple Network Management Plane (SNMP) server of an affected device. This vulnerability is due to incorrect UDP forwarding programming when using SNMP with management plane protection. An attacker could exploit this vulnerability by attempting to perform an SNMP operation using broadcast as the destination address that could be processed by an affected device that is configured with an SNMP server. A successful exploit could allow the attacker to communicate to the device on the configured SNMP ports. Although an unauthenticated attacker could send UDP datagrams to the configured SNMP port, only an authenticated user can retrieve or modify data using SNMP requests.8.6CVE-2024-20304ciscocisco ios xr software+1
EPSS score
0.60%
A vulnerability in the multicast traceroute version 2 (Mtrace2) feature of Cisco IOS XR Software could allow an unauthenticated, remote attacker to exhaust the UDP packet memory of an affected device. This vulnerability exists because the Mtrace2 code does not properly handle packet memory. An attacker could exploit this vulnerability by sending crafted packets to an affected device. A successful exploit could allow the attacker to exhaust the incoming UDP packet memory. The affected device would not be able to process higher-level UDP-based protocols packets, possibly causing a denial of service (DoS) condition. Note: This vulnerability can be exploited using IPv4 or IPv6.