Latest
Most recently published vulnerabilities
RoutineCVE-2026-55216logto-io · logtoLogto: Account takeover via email_verified bypass in social account linking (Azure AD, OAuth2 connectors)Logto is the modern, open-source auth infrastructure for SaaS and AI apps. Prior to 1.46.0, social account linking can use an unverified email returned by the standard OAuth 2.0 or Azure AD connector to select an existing local account. When findSocialRelatedUser matches a victim's email and a request to POST /api/experience/identification enables linkSocialIdentity, an attacker who controls that unverified provider email can link an attacker-controlled social identity to the victim account and sign in as the victim. The issue applies when the provider does not verify email ownership or allows the value to be set freely; Google, GitHub, and default OIDC connector behavior is not affected because those paths expose only verified email. Version 1.46.0 adds an opt-in email synchronization control to the standard OAuth 2.0 connector, while the Azure AD connector has offered an equivalent opt-in control since version 1.43.0. These controls preserve existing behavior by default, so administrators must enable them on affected connectors. A configurable mitigation is available in version 1.46.0.CVSS8.1HighRoutineCVE-2026-133730Dnsmasq: dhcpv6 relay remote crash via stale pointer in relay_upstream6()A flaw was found in dnsmasq, where a memory handling issue exists in its Dynamic Host Configuration Protocol for IPv6 (DHCPv6) relay processing. A remote attacker can exploit this vulnerability by sending a sequence of network packets to a system configured as a DHCPv6 relay. This causes the service to write data to previously freed memory and crash, resulting in a Denial of Service (DoS).CVSS5.9MediumRoutineCVE-2026-133475Corosync: corosync: heap-based buffer overflow in memb_commit_token handling when msg_len exceeds commit_token_storageA heap-based buffer overflow was found in Corosync's Totem SRP membership commit token handling. The sanity check for memb_commit_token messages validates only minimum length and address-entry counts, not an upper bound against the fixed commit_token_storage buffer. A network-adjacent attacker who can deliver a crafted oversized commit token to a node in the GATHER membership state may overflow the heap-allocated totemsrp instance, leading to memory corruption and denial of service.CVSS5.7MediumRoutineCVE-2026-127106Quarkus-rest-jsonb: deeply nested json-b bodies cause large stack-trace logs in quarkus restA flaw was found in the quarkus-rest-jsonb component of Quarkus. An unauthenticated remote attacker can cause a Denial of Service (DoS) by sending HTTP requests containing deeply nested JSON payloads to vulnerable endpoints. The application fails during JSON parsing and records an excessively large error trace for each small request. This disproportionate log amplification can exhaust system disk space or overwhelm log processing pipelines, degrading service availability.CVSS5.3MediumRoutineCVE-2026-95827zephyrproject · zephyrNetwork packet reference leak in IPv6 Router Advertisement handling leads to buffer pool exhaustionThe IPv6 neighbour discovery code in subsys/net/ip/ipv6_nbr.c keeps packets that are waiting for address resolution on a per-neighbour pending queue. A queued packet holds two references: the one handed over by the sender and a second one taken by net_ipv6_send_ns() when the packet is put on the queue. The Router Advertisement handler handle_ra_input() popped each packet off the queue and passed it to net_send_data(), relying on a trailing nbr_clear_ns_pending() call to release the queue reference — but that call then found the queue already empty and released nothing, so one reference was leaked for every pending packet flushed on an RA.
Router Advertisements are unauthenticated link-local ICMPv6 messages, so any node on the same link can trigger the flush. An attacker can make the leak deterministic by advertising itself as a router without a source link-layer address option, so the victim's neighbour entry stays INCOMPLETE, then inducing the victim to transmit through that next hop (the packet is queued and a neighbour solicitation is sent), leaving the solicitation unanswered and sending a further RA to drain the queue. Each round leaks one struct net_pkt together with its net_buf chain.
Leaked packets are never returned to the fixed-size pools, so the loss is permanent for the lifetime of the boot. With CONFIG_NET_PKT_TX_COUNT defaulting to 4 (14 with CONFIG_NET_PKT_LARGE_DEFAULTS), a small number of repetitions exhausts the transmit packet slab and the node stops being able to send any traffic. The impact is availability only: the reference count is always too high, never too low, so no use-after-free or memory corruption arises.
The fix moves the flush into a helper, nbr_send_pending(), which releases the queue reference for every packet it takes off the queue before handing the remaining reference to net_send_data(), and releases that one too if the send is refused.CVSS6.5MediumRoutineCVE-2026-95826zephyrproject · zephyrOut-of-bounds write in the SMSC911x Ethernet driver when transmitting frames larger than the staging bufferThe SMSC911x/LAN9220 Ethernet driver stages every outgoing frame in a fixed-size static buffer before pushing it to the controller FIFO. eth_tx() in drivers/ethernet/eth_smsc911x.c took the frame length from net_pkt_get_len(pkt) and passed it directly to net_pkt_read(pkt, tx_buf, total_len), with no comparison against the size of tx_buf (NET_ETH_MAX_FRAME_SIZE). net_pkt_read() takes no destination size and only fails when the packet is shorter than the requested length, so any packet longer than the staging buffer was copied past its end.
Nothing between the IP layer and the driver bounds the frame to what the link can carry: ethernet_send() in subsys/net/l2/ethernet/ethernet.c performs no length check, and the IPv6 output path only compares the packet against the interface MTU when CONFIG_NET_IPV6_FRAGMENT is enabled (it is disabled by default). The size the stack will build is therefore governed by the interface MTU, and that MTU is remotely settable: handle_ra_input() in subsys/net/ip/ipv6_nbr.c honours the MTU option of any Router Advertisement with a value up to 0xffff, gated only by the standard hop-limit-255 and link-local-source checks. An unauthenticated attacker on the same link can raise the MTU and then have the device emit a single frame of several kilobytes, for example as a TCP segment from any service that returns more than ~1.5 KB or as an oversized UDP datagram.
The result is an out-of-bounds write into .bss immediately after tx_buf, with the overrun length and much of its content derived from the transmitted frame. Consequences range from corruption of adjacent kernel data and a crash to potential control-flow influence where the clobbered globals hold pointers; the practical overrun size is bounded by the network buffer pool rather than by the advertised MTU. The fix rejects frames larger than NET_ETH_MAX_FRAME_SIZE with -EMSGSIZE before any TX_DATA_PORT write, so the controller FIFO is also not left holding a command word without its payload.CVSS7.5HighRoutineCVE-2026-95825zephyrproject · zephyrReference-count underflow in Zephyr network interface address removal releases an IP address that is still in usenet_if_ipv4_addr_rm() and net_if_ipv6_addr_rm() in subsys/net/ip/net_if.c unconditionally called net_if_addr_unref() on the target address. When an earlier removal could not complete because another subsystem still held a reference (the TCP stack takes one on the local address of every connection, in tcp_conn_new() and on connect()), the address is left in place with is_added cleared and is_used still set. A second removal of such an address decremented the reference count again, consuming a reference owned by that other holder. When it was the last one, the address slot was released, its NET_EVENT_IPV*_ADDR_DEL event fired, and the slot became reusable while the holder still believed it owned a reference.
Every address lookup helper matches on is_used and not on is_added, so a half-removed address stays visible to the rest of the stack and repeat removals are readily reachable from remote input. Under IPv6 SLAAC, an on-link node that sends a Router Advertisement with a short valid lifetime causes the address to expire into the deferred state; a refreshing Router Advertisement is handled by net_if_ipv6_addr_update_lifetime(), which re-arms the lifetime timer without restoring the reference, so the next expiry performs the second, reference-stealing removal. With CONFIG_NET_IPV4_ACD and DHCPv4, repeated spoofed ARP conflicts for the device's lease drive dhcpv4_acd_event_handler() into calling net_if_ipv4_addr_rm() more than once on the same address. Where CONFIG_USERSPACE is enabled, the net_if_ipv4_addr_rm_by_index() and net_if_ipv6_addr_rm_by_index() system calls let an unprivileged user-mode thread trigger the same kernel-side release deterministically.
The impact is loss of a configured IP address while connections are still using it, and a corrupted reference count that propagates: the slot can be handed to a newly added address, and when the stale holder later tears down, net_if_addr_unref() resolves the address by value and drops the new incarnation's only reference, removing a live address a second time. The affected objects are static array slots and the counter is never decremented below zero, so there is no memory corruption or information disclosure; the consequence is denial of service against the device's network connectivity, repeatable at the attacker's pace.
The fix resolves the address before touching the reference count and returns false without calling net_if_addr_unref() when the address is already marked as removed, so the public removal API can no longer consume a reference it does not own.CVSS5.3MediumRoutineCVE-2026-77350cody-hutson · pmo-platformpmo-platform: Security Hooks Fail Open Because Runtime PATH Excludes Documented jq Install Pathspmo-platform is a modular PMO and release-management platform for Claude Code. Prior to 3.69.1, core/hooks/block-credential-reads.sh, core/hooks/block-egress.sh, core/hooks/block-fs-boundary.sh, and core/hooks/block-mcp-writes.sh pin PATH to /usr/bin:/bin, hard-code jq as /usr/bin/jq, and return success when jq is unavailable there. On systems where jq exists only in a Homebrew path, including affected pre-Sequoia or Homebrew-only macOS installations, the hooks can skip credential-read, network-egress, filesystem-boundary, and MCP-write controls. Native deny rules independently protect some credential paths but do not backstop the egress or MCP controls. An attacker who can influence a prompt, repository, or evaluation flow can use the skipped checks to expose secrets or perform unauthorized tool actions. This issue is fixed in version 3.69.1.CVSS7.3HighRoutineCVE-2026-77349cody-hutson · pmo-platformpmo-platform: Stored XSS in Eval Viewer via Unescaped JSON Embedded in Script Contextpmo-platform is a modular PMO and release-management platform for Claude Code. From 3.48 until 3.69.1, release/skills/pmo-skill-refiner/eval-viewer/generate_review.py reads untrusted model or skill output from workspace/run*/outputs/ and embeds it with json.dumps into viewer.html inside an inline script without escaping HTML metacharacters. A crafted output can close the script element and execute JavaScript when an operator generates and opens the viewer. The maintainer also confirmed that DOM-based injection through renderGrades and renderBenchmark innerHTML survives transport-only escaping, so affected render sinks must neutralize the content. Executed script can read embedded prompts and outputs, alter the viewer DOM, or modify saved feedback. This issue is fixed in version 3.69.1.CVSS5.0MediumRoutineCVE-2026-77309nasa-ammos · ait-guiAIT-GUI route chain allows unauthenticated Python execution in server processAIT GUI provides a framework for building custom websites for real-time telemetry monitoring, commanding, and other mission operations. From 1.0.0 until 2.5.1, POST /tlm/query in ait/gui/__init__.py writes attacker-controlled field data to fields_in.txt, and its no-PCAP error path can abort before deleting that file. The unauthenticated POST /script/run route accepts a scriptPath that resolves outside ScriptRoot, reads the selected file, and executes it as Python. A network-reachable attacker can obtain the ordinary session cookie without credentials, combine the two routes, and execute arbitrary Python code with the AIT-GUI server process privileges. This issue is fixed in version 2.5.1.CVSS8.8HighRoutineCVE-2026-44908facebook · whatsapp business for android +4 morefacebook whatsapp business for androidImproper following of a certificate’s chain of trust in the remote-attestation verifier used to establish trust with Meta AI's confidential computing backend in WhatsApp for iOS before 2.26.24.72, WhatsApp Business for iOS and WhatsApp for Mac Desktop before v2.26.23.72, WhatsApp for Android before v2.26.23.74, and WhatsApp Business for Android before v2.26.23.70 could have allowed someone positioned within Meta infrastructure to bypass the hardware root of trust by presenting clients with a VCEK certificate signed by a key other than the hardware manufacturer’s. Any such VCEK Cert would first have to be published to the third-party binary transparency ledger used by WhatsApp Private Processing. The ledger shows that every published VCEK certificate chains to the hardware root of trust, confirming no exploitation.CVSS4.8MediumRoutineCVE-2026-102769facebook · whatsapp business for android +1 morefacebook whatsapp business for androidA SQL injection vulnerability when the recipient tapped on a specially crafted “order details” message from an unofficial client in WhatsApp for Android prior to version 2.26.35.74 could have allowed deletion of locally-stored WhatsApp files and, only if the user is online at time of receipt, leaked one bit of information asked by the attacker about the user’s chat database via an induced-crash delivery receipt timing sidechannel. We have not seen evidence of exploitation in the wild.CVSS6.8MediumRoutineCVE-2026-23871facebook · whatsapp business for android +1 morefacebook whatsapp business for androidIncomplete validation of external ad-reply URLs in WhatsApp for Android and WhatsApp Business for Android before 2.26.17.4 could have caused a target's device to reveal its IP information to an attacker if an attacker sent media from an attacker-controlled URL when a crafted Click to WhatsApp ad-reply message was rendered and displayed in a message thread. This issue may have been abused in conjunction with specific spam messages.CVSS3.5LowPrioritiseCVE-2026-115407In `github.com/eclipse-keypont/crypto11/v2` versions `<= 2.0.0-rc8` (and the deprecated v1 module paths `github.com/eclipse-keypont/crypto11 <= 1.6.8`, `github.com/ThalesGroup/crypto11 <= 1.7.0-rc1` and `github.com/ThalesIgnite/crypto11 <= 1.2.5`), the `cipher.AEAD` returned by `SecretKey.NewGCM()` passes whatever nonce it is given straight to `CK_GCM_PARAMS` without checking its length against `NonceSize()`, and accepts an empty nonce. On a token that accepts a zero-length GCM IV — SoftHSM2 does — every `Seal` with an empty nonce encrypts under the same IV, reusing the keystream and exposing the GHASH authentication key, which allows forgeries. Separately, `Config.UseGCMIVFromHSM` sends a NULL IV with length zero to the token unless `GCMIVFromHSMControl.SupplyIvForHSMGCMEncrypt` is also set, so the token has nowhere to write the IV it generates: a `Seal` with a non-empty nonce panics after the plaintext has already been encrypted, and a `Seal` with an empty nonce returns ciphertext under an empty IV without error. On the v1 line HSM-IV mode additionally never copies the token-generated IV back to the caller, so the caller keeps its own nonce while the data was encrypted under another one.CVSS9.1CriticalRoutineCVE-2026-133878mattermostMattermost server missing permission check on group WebSocket events allows information disclosure to authenticated usersMattermost versions 11.11.x <= 11.11.1, 11.7.x <= 11.7.14, 11.10.x <= 11.10.4 fail to restrict the broadcast scope of group WebSocket events to sessions permitted to read the group which allows an authenticated user, including guests, to obtain the display name, description, member count and member IDs of non-referenceable groups via the received_group event emitted when a group is created, updated, deleted or restored. Mattermost Advisory ID: MMSA-2026-00731CVSS4.3MediumRoutineCVE-2026-133876kartones · flask-calendarflask-calendar before commit bfde72e Stored XSS via Task DetailsKartones flask-calendar before commit bfde72e contains a stored cross-site scripting vulnerability because task_details_for_markup returns unescaped content rendered with the |safe filter. Authenticated shared calendar members can store script in task details that executes for other members, letting attackers read and modify their private calendars.CVSS5.4MediumRoutineCVE-2026-133875martialbe · one-hubone-hub through 0.14.27 SSRF via Vision Chat image_urlone-hub through 0.14.27 contains a server-side request forgery vulnerability in GetImageFromUrl in common/image/image.go that fetches vision chat image_url values without destination restrictions. Attackers holding a standard non-admin API token can send crafted /v1/chat/completions requests via Claude, OpenRouter or Ollama providers to reach internal services or cloud metadata endpoints.CVSS5.3MediumRoutineCVE-2026-133874iceburgcrmIceburg CRM through 5.0.0 Authorization Bypass via Record SaveIceburg CRM through 5.0.0 contains an incorrect authorization vulnerability in Module::saveRecord() that allows authenticated users to write to unauthorized modules by prefixing request body keys with another module id. Attackers with write access to one module can submit crafted requests to POST /data/save or PUT /api/crm/{id} to set their role_id to Admin and access administrative data.CVSS8.6HighRoutineCVE-2026-133873maillab · cloud-mailCloud Mail before 3.6.0 Stored XSS via Inline Inbound Email AttachmentsCloud Mail before 3.6.0 contains a stored cross-site scripting vulnerability in attService.addAtt that allows unauthenticated attackers to store inline attachments with sender-supplied MIME types. Attackers can email SVG or HTML attachments, compute the content-hash URL under /oss/ or /attachments/, and steal session JWTs from localStorage to hijack accounts including administrators.CVSS6.1MediumPrioritiseCVE-2026-133872lesspassLessPass Backend before Commit 9469b0c Missing Rate Limiting on JWT LoginLessPass self-hosted sync server backend before commit 9469b0c lacks rate limiting on the JWT login endpoints /tokens/auth/ and /auth/jwt/create/, allowing unlimited authentication attempts. Unauthenticated remote attackers can brute force passwords or perform credential stuffing against known account emails to obtain tokens granting read and write access to stored profiles.CVSS9.1Critical