9.8

CVE-2022-49201: linux Race Condition

CVSS: 9.8v3.1CriticalModified
AliasesUBUNTU-CVE-2022-49201DEBIAN-CVE-2022-49201
Published 26-02-2025Last modified 05-08-2026

Vulnerability summary

CVE-2022-49201 is a critical (CVSS 9.8) Race Condition vulnerability in linux. EPSS estimates a 0.50% chance of exploitation in the next 30 days, higher than 41.3% of scored vulnerabilities.

Overall risk
70/100
0100
High · default modelHow is this calculated?
CVSS score
9.8/10
010
Critical · v3.1 (CVE.org)
EPSS score
0.50%
0%100%
Low · +0.01 pp in 30 days
KEVNot listedIn no KEV catalog
RansomwareNone recordedNo known use recorded
Public exploits0No public exploits recorded

Advisory lineage

Upstream 0 · Downstream 9 · Related 9

Timeline

  1. 26-02-2025
    PublishedVulnerability first disclosed.
  2. 05-08-2026
    Last modifiedVulnerability information updated.

Description

In the Linux kernel, the following vulnerability has been resolved: ibmvnic: fix race between xmit and reset There is a race between reset and the transmit paths that can lead to ibmvnic_xmit() accessing an scrq after it has been freed in the reset path. It can result in a crash like: Kernel attempted to read user page (0) - exploit attempt? (uid: 0) BUG: Kernel NULL pointer dereference on read at 0x00000000 Faulting instruction address: 0xc0080000016189f8 Oops: Kernel access of bad area, sig: 11 [#1] ... NIP [c0080000016189f8] ibmvnic_xmit+0x60/0xb60 [ibmvnic] LR [c000000000c0046c] dev_hard_start_xmit+0x11c/0x280 Call Trace: [c008000001618f08] ibmvnic_xmit+0x570/0xb60 [ibmvnic] (unreliable) [c000000000c0046c] dev_hard_start_xmit+0x11c/0x280 [c000000000c9cfcc] sch_direct_xmit+0xec/0x330 [c000000000bfe640] __dev_xmit_skb+0x3a0/0x9d0 [c000000000c00ad4] __dev_queue_xmit+0x394/0x730 [c008000002db813c] __bond_start_xmit+0x254/0x450 [bonding] [c008000002db8378] bond_start_xmit+0x40/0xc0 [bonding] [c000000000c0046c] dev_hard_start_xmit+0x11c/0x280 [c000000000c00ca4] __dev_queue_xmit+0x564/0x730 [c000000000cf97e0] neigh_hh_output+0xd0/0x180 [c000000000cfa69c] ip_finish_output2+0x31c/0x5c0 [c000000000cfd244] __ip_queue_xmit+0x194/0x4f0 [c000000000d2a3c4] __tcp_transmit_skb+0x434/0x9b0 [c000000000d2d1e0] __tcp_retransmit_skb+0x1d0/0x6a0 [c000000000d2d984] tcp_retransmit_skb+0x34/0x130 [c000000000d310e8] tcp_retransmit_timer+0x388/0x6d0 [c000000000d315ec] tcp_write_timer_handler+0x1bc/0x330 [c000000000d317bc] tcp_write_timer+0x5c/0x200 [c000000000243270] call_timer_fn+0x50/0x1c0 [c000000000243704] __run_timers.part.0+0x324/0x460 [c000000000243894] run_timer_softirq+0x54/0xa0 [c000000000ea713c] __do_softirq+0x15c/0x3e0 [c000000000166258] __irq_exit_rcu+0x158/0x190 [c000000000166420] irq_exit+0x20/0x40 [c00000000002853c] timer_interrupt+0x14c/0x2b0 [c000000000009a00] decrementer_common_virt+0x210/0x220 --- interrupt: 900 at plpar_hcall_norets_notrace+0x18/0x2c The immediate cause of the crash is the access of tx_scrq in the following snippet during a reset, where the tx_scrq can be either NULL or an address that will soon be invalid: ibmvnic_xmit() { ... tx_scrq = adapter->tx_scrq[queue_num]; txq = netdev_get_tx_queue(netdev, queue_num); ind_bufp = &tx_scrq->ind_buf; if (test_bit(0, &adapter->resetting)) { ... } But beyond that, the call to ibmvnic_xmit() itself is not safe during a reset and the reset path attempts to avoid this by stopping the queue in ibmvnic_cleanup(). However just after the queue was stopped, an in-flight ibmvnic_complete_tx() could have restarted the queue even as the reset is progressing. Since the queue was restarted we could get a call to ibmvnic_xmit() which can then access the bad tx_scrq (or other fields). We cannot however simply have ibmvnic_complete_tx() check the ->resetting bit and skip starting the queue. This can race at the "back-end" of a good reset which just restarted the queue but has not cleared the ->resetting bit yet. If we skip restarting the queue due to ->resetting being true, the queue would remain stopped indefinitely potentially leading to transmit timeouts. IOW ->resetting is too broad for this purpose. Instead use a new flag that indicates whether or not the queues are active. Only the open/ reset paths control when the queues are active. ibmvnic_complete_tx() and others wake up the queue only if the queue is marked active. So we will have: A. reset/open thread in ibmvnic_cleanup() and __ibmvnic_open() ->resetting = true ->tx_queues_active = false disable tx queues ... ->tx_queues_active = true start tx queues B. Tx interrupt in ibmvnic_complete_tx(): if (->tx_queues_active) netif_wake_subqueue(); To ensure that ->tx_queues_active and state of the queues are consistent, we need a lock which: - must also be taken in the interrupt path (ibmvnic_complete_tx()) - shared across the multiple ---truncated---

CVSS metrics

4 scores · 4 sources · 1 version

EPSS trend

Probability

0.50%

Chance of exploitation in the next 30 days

Percentile

41%

Versus all other CVEs

30-day change

+0.01 pp

From 0.49% on 19-09-2026

19-09-202619-10-2026
EPSS score
0.50%

Known exploited

Compare KEV catalogs

Not in any of the 3 tracked catalogs.

Public exploits

0 found

No public exploits indexed.

Weaknesses

CWE · root cause

Affected systems

Ubuntu103 products
  • linuxAll versions (No fix recorded) | < 5.4.0-242.262 | < 5.15.0-37.39
  • linux-allwinner-5.19All versions (No fix recorded)
  • linux-awsAll versions (No fix recorded) | < 5.4.0-1165.176 | < 5.15.0-1011.14
  • linux-aws-5.0All versions (No fix recorded)
  • linux-aws-5.11All versions (No fix recorded)
Linux2 products
  • linux≥ 7ed5b31f4a6695a21f617df07646e9b15c6c1d29, < 1bd58abf595b6cf1ba6dd47ec887c4c009155fc9 | ≥ 7ed5b31f4a6695a21f617df07646e9b15c6c1d29, < 475f9cce98b63bc145b4efa66fa51175d4cb345f | ≥ 7ed5b31f4a6695a21f617df07646e9b15c6c1d29, < 8507c6ade73cdbbbda5c3d31d67f52f2e1cf03fe | ≥ 7ed5b31f4a6695a21f617df07646e9b15c6c1d29, < 4219196d1f662cb10a462eb9e076633a3fc31a15 | 5.4
  • linux_kernel≥ 5.4, < 5.15.33 | ≥ 5.16, < 5.16.19 | ≥ 5.17, < 5.17.2
Debian1 product
  • linux< 5.17.3-1

3 vendors · 106 products

References

10 links