CveMateVulnerability intelligence

Mobyproject vulnerabilities, page 2

38 vulnerabilities

Known vulnerabilities in Mobyproject products, newest first, with CVSS severity, EPSS, KEV listings and ransomware use, across 4 products.

CVE-2024-32473chainguardbuf+512y ago18-04-2024 21:55

Moby is an open source container framework that is a key component of Docker Engine, Docker Desktop, and other distributions of container tooling or runtimes. In 26.0.0, IPv6 is not disabled on network interfaces, including those belonging to networks where `--ipv6=false`. An container with an `ipvlan` or `macvlan` interface will normally be configured to share an external network link with the host machine. Because of this direct access, (1) Containers may be able to communicate with other hosts on the local network over link-local IPv6 addresses, (2) if router advertisements are being broadcast over the local network, containers may get SLAAC-assigned addresses, and (3) the interface will be a member of IPv6 multicast groups. This means interfaces in IPv4-only networks present an unexpectedly and unnecessarily increased attack surface. The issue is patched in 26.0.2. To completely disable IPv6 in a container, use `--sysctl=net.ipv6.conf.all.disable_ipv6=1` in the `docker create` or `docker run` command. Or, in the service configuration of a `compose` file.CVE-2024-23650chainguardbuildkitd+442y ago31-01-2024 21:42

BuildKit is a toolkit for converting source code to build artifacts in an efficient, expressive and repeatable manner. A malicious BuildKit client or frontend could craft a request that could lead to BuildKit daemon crashing with a panic. The issue has been fixed in v0.12.5. As a workaround, avoid using BuildKit frontends from untrusted sources.CVE-2024-23652chainguardbuildkitd+452y ago31-01-2024 21:57

BuildKit is a toolkit for converting source code to build artifacts in an efficient, expressive and repeatable manner. A malicious BuildKit frontend or Dockerfile using RUN --mount could trick the feature that removes empty files created for the mountpoints into removing a file outside the container, from the host system. The issue has been fixed in v0.12.5. Workarounds include avoiding using BuildKit frontends from an untrusted source or building an untrusted Dockerfile containing RUN --mount feature.CVE-2024-23651chainguardbuildkitd+452y ago31-01-2024 21:49

BuildKit is a toolkit for converting source code to build artifacts in an efficient, expressive and repeatable manner. Two malicious build steps running in parallel sharing the same cache mounts with subpaths could cause a race condition that can lead to files from the host system being accessible to the build container. The issue has been fixed in v0.12.5. Workarounds include, avoiding using BuildKit frontend from an untrusted source or building an untrusted Dockerfile containing cache mounts with --mount=type=cache,source=... options.CVE-2024-23653chainguardbuildkitd+472y ago31-01-2024 22:03

BuildKit is a toolkit for converting source code to build artifacts in an efficient, expressive and repeatable manner. In addition to running containers as build steps, BuildKit also provides APIs for running interactive containers based on built images. It was possible to use these APIs to ask BuildKit to run a container with elevated privileges. Normally, running such containers is only allowed if special `security.insecure` entitlement is enabled both by buildkitd configuration and allowed by the user initializing the build request. The issue has been fixed in v0.12.5 . Avoid using BuildKit frontends from untrusted sources.CVE-2026-41568chainguardagentbeat+7004mo ago12-06-2026 18:08

Moby is an open source container framework. In Docker Engine prior to version 29.5.1, Docker Daemon versions 28.5.2 and prior, and Moby Daemon prior to version 2.0.0-beta.14, a race condition during docker cp mount setup allows a malicious container to create empty files or directories at arbitrary absolute paths on the host filesystem. This issue has been patched in Docker Engine version 29.5.1 and Moby Daemon version 2.0.0-beta.14.CVE-2026-42306chainguardagentbeat+7004mo ago12-06-2026 18:09

Moby is an open source container framework. In Docker Engine prior to version 29.5.1, Docker Daemon versions 28.5.2 and prior, and Moby Daemon prior to version 2.0.0-beta.14, a race condition during docker cp mount setup allows a malicious container to redirect a bind mount target to an arbitrary host path, potentially overwriting host files or causing denial of service. This issue has been patched in Docker Engine version 29.5.1 and Moby Daemon version 2.0.0-beta.14.CVE-2026-15793ubuntudocker.io+33mo ago21-07-2026 16:10

BuildKit custom frontends or clients using the raw low-level API can set git.checkoutbundle=true when checking out Git sources. If the Git source is malicious, this could lead to a crafted command invocation on the host.CVE-2026-15792ubuntudocker.io+33mo ago21-07-2026 16:10

A malicious BuildKit client or frontend could craft a request that could lead to BuildKit daemon crashing with a panic.CVE-2026-15788mobybuildkit+13mo ago20-07-2026 19:12

BuildKit's cache mount source= selector on Windows Container on Windows (WCOW) workers does not detect NTFS directory junctions placed inside the cache root. A build authored by an untrusted user on a WCOW-configured BuildKit daemon can read arbitrary host files reachable to the BuildKit daemon process.CVE-2026-15789mobybuildkit+63mo ago21-07-2026 16:10

A custom client can produce such an upload request to the BuildKit daemon that files can escape from the BuildKit-controlled state directory. The client needs to have valid permissions to access the BuildKit control API to issue builds, e.g., bypass authentication, etc.CVE-2026-15791ubuntudocker.io+33mo ago21-07-2026 16:10

A crafted message in the BuildKit low-level build API can be used to remove the contents of the /tmp directory. The action that can normally be used to delete files inside the build container rootfs can escape into the real host temp directory.CVE-2026-33748chainguardbuildah+746mo ago27-03-2026 14:00

BuildKit is a toolkit for converting source code to build artifacts in an efficient, expressive and repeatable manner. Prior to version 0.28.1, insufficient validation of Git URL fragment subdir components may allow access to files outside the checked-out Git repository root. Possible access is limited to files on the same mounted filesystem. The issue has been fixed in version v0.28.1 The issue affects only builds that use Git URLs with a subpath component. As a workaround, avoid building Dockerfiles from untrusted sources or using the subdir component from an untrusted Git repository where the subdir component could point to a symlink.CVE-2026-33747chainguardbuildah+766mo ago27-03-2026 00:49

BuildKit is a toolkit for converting source code to build artifacts in an efficient, expressive and repeatable manner. Prior to version 0.28.1, when using a custom BuildKit frontend, the frontend can craft an API message that causes files to be written outside of the BuildKit state directory for the execution context. The issue has been fixed in v0.28.1. The vulnerability requires using an untrusted BuildKit frontend set with `#syntax` or `--build-arg BUILDKIT_SYNTAX`. Using these options with a well-known frontend image like `docker/dockerfile` is not affected.CVE-2023-26054ubuntudocker.io-app+33y ago06-03-2023 18:05

BuildKit is a toolkit for converting source code to build artifacts in an efficient, expressive and repeatable manner. In affected versions when the user sends a build request that contains a Git URL that contains credentials and the build creates a provenance attestation describing that build, these credentials could be visible from the provenance attestation. Git URL can be passed in two ways: 1) Invoking build directly from a URL with credentials. 2) If the client sends additional version control system (VCS) info hint parameters on builds from a local source. Usually, that would mean reading the origin URL from `.git/config` file. When a build is performed under specific conditions where credentials were passed to BuildKit they may be visible to everyone who has access to provenance attestation. Provenance attestations and VCS info hints were added in version v0.11.0. Previous versions are not vulnerable. In v0.10, when building directly from Git URL, the same URL could be visible in `BuildInfo` structure that is a predecessor of Provenance attestations. Previous versions are not vulnerable. This bug has been fixed in v0.11.4. Users are advised to upgrade. Users unable to upgrade may disable VCS info hints by setting `BUILDX_GIT_INFO=0`. `buildctl` does not set VCS hints based on `.git` directory, and values would need to be passed manually with `--opt`.CVE-2023-28841chainguardapko+233y ago04-04-2023 21:12

Moby is an open source container framework developed by Docker Inc. that is distributed as Docker, Mirantis Container Runtime, and various other downstream projects/products. The Moby daemon component (`dockerd`), which is developed as moby/moby is commonly referred to as *Docker*. Swarm Mode, which is compiled in and delivered by default in `dockerd` and is thus present in most major Moby downstreams, is a simple, built-in container orchestrator that is implemented through a combination of SwarmKit and supporting network code. The `overlay` network driver is a core feature of Swarm Mode, providing isolated virtual LANs that allow communication between containers and services across the cluster. This driver is an implementation/user of VXLAN, which encapsulates link-layer (Ethernet) frames in UDP datagrams that tag the frame with the VXLAN metadata, including a VXLAN Network ID (VNI) that identifies the originating overlay network. In addition, the overlay network driver supports an optional, off-by-default encrypted mode, which is especially useful when VXLAN packets traverses an untrusted network between nodes. Encrypted overlay networks function by encapsulating the VXLAN datagrams through the use of the IPsec Encapsulating Security Payload protocol in Transport mode. By deploying IPSec encapsulation, encrypted overlay networks gain the additional properties of source authentication through cryptographic proof, data integrity through check-summing, and confidentiality through encryption. When setting an endpoint up on an encrypted overlay network, Moby installs three iptables (Linux kernel firewall) rules that enforce both incoming and outgoing IPSec. These rules rely on the `u32` iptables extension provided by the `xt_u32` kernel module to directly filter on a VXLAN packet's VNI field, so that IPSec guarantees can be enforced on encrypted overlay networks without interfering with other overlay networks or other users of VXLAN. An iptables rule designates outgoing VXLAN datagrams with a VNI that corresponds to an encrypted overlay network for IPsec encapsulation. Encrypted overlay networks on affected platforms silently transmit unencrypted data. As a result, `overlay` networks may appear to be functional, passing traffic as expected, but without any of the expected confidentiality or data integrity guarantees. It is possible for an attacker sitting in a trusted position on the network to read all of the application traffic that is moving across the overlay network, resulting in unexpected secrets or user data disclosure. Thus, because many database protocols, internal APIs, etc. are not protected by a second layer of encryption, a user may use Swarm encrypted overlay networks to provide confidentiality, which due to this vulnerability this is no longer guaranteed. Patches are available in Moby releases 23.0.3, and 20.10.24. As Mirantis Container Runtime's 20.10 releases are numbered differently, users of that platform should update to 20.10.16. Some workarounds are available. Close the VXLAN port (by default, UDP port 4789) to outgoing traffic at the Internet boundary in order to prevent unintentionally leaking unencrypted traffic over the Internet, and/or ensure that the `xt_u32` kernel module is available on all nodes of the Swarm cluster.CVE-2023-28842chainguardapko+233y ago04-04-2023 21:07

Moby) is an open source container framework developed by Docker Inc. that is distributed as Docker, Mirantis Container Runtime, and various other downstream projects/products. The Moby daemon component (`dockerd`), which is developed as moby/moby is commonly referred to as *Docker*. Swarm Mode, which is compiled in and delivered by default in `dockerd` and is thus present in most major Moby downstreams, is a simple, built-in container orchestrator that is implemented through a combination of SwarmKit and supporting network code. The `overlay` network driver is a core feature of Swarm Mode, providing isolated virtual LANs that allow communication between containers and services across the cluster. This driver is an implementation/user of VXLAN, which encapsulates link-layer (Ethernet) frames in UDP datagrams that tag the frame with the VXLAN metadata, including a VXLAN Network ID (VNI) that identifies the originating overlay network. In addition, the overlay network driver supports an optional, off-by-default encrypted mode, which is especially useful when VXLAN packets traverses an untrusted network between nodes. Encrypted overlay networks function by encapsulating the VXLAN datagrams through the use of the IPsec Encapsulating Security Payload protocol in Transport mode. By deploying IPSec encapsulation, encrypted overlay networks gain the additional properties of source authentication through cryptographic proof, data integrity through check-summing, and confidentiality through encryption. When setting an endpoint up on an encrypted overlay network, Moby installs three iptables (Linux kernel firewall) rules that enforce both incoming and outgoing IPSec. These rules rely on the `u32` iptables extension provided by the `xt_u32` kernel module to directly filter on a VXLAN packet's VNI field, so that IPSec guarantees can be enforced on encrypted overlay networks without interfering with other overlay networks or other users of VXLAN. The `overlay` driver dynamically and lazily defines the kernel configuration for the VXLAN network on each node as containers are attached and detached. Routes and encryption parameters are only defined for destination nodes that participate in the network. The iptables rules that prevent encrypted overlay networks from accepting unencrypted packets are not created until a peer is available with which to communicate. Encrypted overlay networks silently accept cleartext VXLAN datagrams that are tagged with the VNI of an encrypted overlay network. As a result, it is possible to inject arbitrary Ethernet frames into the encrypted overlay network by encapsulating them in VXLAN datagrams. The implications of this can be quite dire, and GHSA-vwm3-crmr-xfxw should be referenced for a deeper exploration. Patches are available in Moby releases 23.0.3, and 20.10.24. As Mirantis Container Runtime's 20.10 releases are numbered differently, users of that platform should update to 20.10.16. Some workarounds are available. In multi-node clusters, deploy a global ‘pause’ container for each encrypted overlay network, on every node. For a single-node cluster, do not use overlay networks of any sort. Bridge networks provide the same connectivity on a single node and have no multi-node features. The Swarm ingress feature is implemented using an overlay network, but can be disabled by publishing ports in `host` mode instead of `ingress` mode (allowing the use of an external load balancer), and removing the `ingress` network. If encrypted overlay networks are in exclusive use, block UDP port 4789 from traffic that has not been validated by IPSec.CVE-2023-28840chainguardapko+243y ago04-04-2023 21:13

Moby is an open source container framework developed by Docker Inc. that is distributed as Docker, Mirantis Container Runtime, and various other downstream projects/products. The Moby daemon component (`dockerd`), which is developed as moby/moby, is commonly referred to as *Docker*. Swarm Mode, which is compiled in and delivered by default in dockerd and is thus present in most major Moby downstreams, is a simple, built-in container orchestrator that is implemented through a combination of SwarmKit and supporting network code. The overlay network driver is a core feature of Swarm Mode, providing isolated virtual LANs that allow communication between containers and services across the cluster. This driver is an implementation/user of VXLAN, which encapsulates link-layer (Ethernet) frames in UDP datagrams that tag the frame with a VXLAN Network ID (VNI) that identifies the originating overlay network. In addition, the overlay network driver supports an optional, off-by-default encrypted mode, which is especially useful when VXLAN packets traverses an untrusted network between nodes. Encrypted overlay networks function by encapsulating the VXLAN datagrams through the use of the IPsec Encapsulating Security Payload protocol in Transport mode. By deploying IPSec encapsulation, encrypted overlay networks gain the additional properties of source authentication through cryptographic proof, data integrity through check-summing, and confidentiality through encryption. When setting an endpoint up on an encrypted overlay network, Moby installs three iptables (Linux kernel firewall) rules that enforce both incoming and outgoing IPSec. These rules rely on the u32 iptables extension provided by the xt_u32 kernel module to directly filter on a VXLAN packet's VNI field, so that IPSec guarantees can be enforced on encrypted overlay networks without interfering with other overlay networks or other users of VXLAN. Two iptables rules serve to filter incoming VXLAN datagrams with a VNI that corresponds to an encrypted network and discards unencrypted datagrams. The rules are appended to the end of the INPUT filter chain, following any rules that have been previously set by the system administrator. Administrator-set rules take precedence over the rules Moby sets to discard unencrypted VXLAN datagrams, which can potentially admit unencrypted datagrams that should have been discarded. The injection of arbitrary Ethernet frames can enable a Denial of Service attack. A sophisticated attacker may be able to establish a UDP or TCP connection by way of the container’s outbound gateway that would otherwise be blocked by a stateful firewall, or carry out other escalations beyond simple injection by smuggling packets into the overlay network. Patches are available in Moby releases 23.0.3 and 20.10.24. As Mirantis Container Runtime's 20.10 releases are numbered differently, users of that platform should update to 20.10.16. Some workarounds are available. Close the VXLAN port (by default, UDP port 4789) to incoming traffic at the Internet boundary to prevent all VXLAN packet injection, and/or ensure that the `xt_u32` kernel module is available on all nodes of the Swarm cluster.