Rabbitmq vulnerabilities
101 vulnerabilities
Known vulnerabilities in Rabbitmq products, newest first, with CVSS severity, EPSS, KEV listings and ransomware use, across 4 products.
Products
4- Rabbitmq Server77 vulnerabilities
- Amqp091 Go12 vulnerabilities
- Rabbitmq Java Client11 vulnerabilities
- Jms Client1 vulnerabilities
CVE-2026-67416debianrabbitmq-server+2
EPSS score0.54%
RabbitMQ is a messaging and streaming broker. From 4.0.0 until 4.0.24, 4.1.15, 4.2.10, and 4.3.4, the optimized AMQP 1.0 server_mode parser in deps/amqp10_common/src/amqp10_binary_parser.erl matches the textual prefixes of symbolic data, sequence, and value body descriptors without verifying their encoded symbol lengths. An authenticated AMQP 1.0 publisher with write permission can submit a well-formed unknown descriptor that begins with a registered body descriptor, and RabbitMQ misclassifies and stores the bytes as a standard body section. Strict AMQP 1.0 consumers can terminate while decoding the stored entry. For bodies misclassified as data, AMQP 0-9-1 or other cross-protocol conversion performs full body decoding and can terminate the consumer protocol process, with acknowledgement-required delivery permitting repeated failures. Sequence and value classifications are normally transported as opaque encoded payloads on that conversion path. The broker remains alive, and the issue does not bypass routing or authorization. This issue is fixed in versions 4.0.24, 4.1.15, 4.2.10, and 4.3.4.CVE-2026-67414debianrabbitmq-server+2EPSS score0.54%
RabbitMQ is a messaging and streaming broker. From 4.0.0 until 4.0.24, 4.1.15, 4.2.10, and 4.3.4, deps/amqp10_common/src/amqp10_binary_parser.erl materializes each element of AMQP 1.0 arrays whose shared constructor has zero width, while limiting only the number of elements in each array and not the aggregate arrays in a frame. After completing SASL authentication, a low-privilege client can send an ordinary frame containing many individually permitted arrays, causing a small frame to expand into a very large reader-process heap before later frame validation or authorization. Because deps/rabbit/src/rabbit_amqp_reader.erl clears the pre-authentication max_heap_size guard after login, repeated or concurrent frames can trigger the node-wide memory alarm, block publishers, or exhaust broker memory. This issue is fixed in versions 4.0.24, 4.1.15, 4.2.10, and 4.3.4.CVE-2026-67418debianrabbitmq-server+2EPSS score0.40%
RabbitMQ is a messaging and streaming broker. From 3.13.0 until 3.13.19, 4.0.24, 4.1.15, 4.2.10, and 4.3.5, the MQTT 5 parser in deps/rabbitmq_mqtt/src/rabbit_mqtt_packet.erl accepts Request-Problem-Information on PUBLISH packets even though the property is valid only for CONNECT. An authenticated publisher with topic write permission can cause the broker to store and route that inapplicable property to a separately authenticated matching subscriber. When the subscriber path serializes the outbound PUBLISH, serialise_prop/2 has no matching clause, and the uncontained function_clause exception closes the victim MQTT or Web MQTT connection. The publisher connection and broker remain available, and queued replay, retained-message persistence, and broker-wide denial of service were not established. This issue is fixed in versions 3.13.19, 4.0.24, 4.1.15, 4.2.10, and 4.3.5.CVE-2021-32719debianrabbitmq-server+3EPSS score1.42%
RabbitMQ is a multi-protocol messaging broker. In rabbitmq-server prior to version 3.8.18, when a federation link was displayed in the RabbitMQ management UI via the `rabbitmq_federation_management` plugin, its consumer tag was rendered without proper <script> tag sanitization. This potentially allows for JavaScript code execution in the context of the page. The user must be signed in and have elevated permissions (manage federation upstreams and policies) for this to occur. The vulnerability is patched in RabbitMQ 3.8.18. As a workaround, disable the `rabbitmq_federation_management` plugin and use [CLI tools](https://www.rabbitmq.com/cli.html) instead.CVE-2021-32718debianrabbitmq-server+4EPSS score1.43%
RabbitMQ is a multi-protocol messaging broker. In rabbitmq-server prior to version 3.8.17, a new user being added via management UI could lead to the user's bane being rendered in a confirmation message without proper `<script>` tag sanitization, potentially allowing for JavaScript code execution in the context of the page. In order for this to occur, the user must be signed in and have elevated permissions (other user management). The vulnerability is patched in RabbitMQ 3.8.17. As a workaround, disable `rabbitmq_management` plugin and use CLI tools for management operations and Prometheus and Grafana for metrics and monitoring.CVE-2025-30219debianrabbitmq-server+12EPSS score0.21%
RabbitMQ is a messaging and streaming broker. Versions prior to 4.0.3 are vulnerable to a sophisticated attack that could modify virtual host name on disk and then make it unrecoverable (with other on disk file modifications) can lead to arbitrary JavaScript code execution in the browsers of management UI users. When a virtual host on a RabbitMQ node fails to start, recent versions
will display an error message (a notification) in the management UI. The error message includes virtual host name, which was not escaped prior to open source RabbitMQ 4.0.3 and Tanzu RabbitMQ 4.0.3, 3.13.8. An attack that both makes a virtual host fail to start and creates a new virtual host name with an XSS code snippet or changes the name of an existing virtual host on disk could trigger arbitrary JavaScript code execution in the management UI (the user's browser). Open source RabbitMQ `4.0.3` and Tanzu RabbitMQ `4.0.3` and `3.13.8` patch the issue.CVE-2025-50200broadcomrabbitmq_server+10EPSS score0.21%
RabbitMQ is a messaging and streaming broker. In versions 3.13.7 and prior, RabbitMQ is logging authorization headers in plaintext encoded in base64. When querying RabbitMQ api with HTTP/s with basic authentication it creates logs with all headers in request, including authorization headers which show base64 encoded username:password. This is easy to decode and afterwards could be used to obtain control to the system depending on credentials. This issue has been patched in version 4.0.8.CVE-2020-36282com.rabbitmq.jmsrabbitmq-jms+1EPSS score2.84%
JMS Client for RabbitMQ 1.x before 1.15.2 and 2.x before 2.2.0 is vulnerable to unsafe deserialization that can result in code execution via crafted StreamMessage data.CVE-2022-31008broadcomrabbitmq_server+8EPSS score0.40%
RabbitMQ is a multi-protocol messaging and streaming broker. In affected versions the shovel and federation plugins perform URI obfuscation in their worker (link) state. The encryption key used to encrypt the URI was seeded with a predictable secret. This means that in case of certain exceptions related to Shovel and Federation plugins, reasonably easily deobfuscatable data could appear in the node log. Patched versions correctly use a cluster-wide secret for that purpose. This issue has been addressed and Patched versions: `3.10.2`, `3.9.18`, `3.8.32` are available. Users unable to upgrade should disable the Shovel and Federation plugins.CVE-2024-51988ubunturabbitmq-server+1EPSS score0.36%
RabbitMQ is a feature rich, multi-protocol messaging and streaming broker. In affected versions queue deletion via the HTTP API was not verifying the `configure` permission of the user. Users who had all of the following: 1. Valid credentials, 2. Some permissions for the target virtual host & 3. HTTP API access. could delete queues it had no (deletion) permissions for. This issue has been addressed in version 3.12.11 of the open source rabbitMQ release and in versions 1.5.2, 3.13.0, and 4.0.0 of the tanzu release. Users are advised to upgrade. Users unable to upgrade may disable management plugin and use, for example, Prometheus and Grafana for monitoring.CVE-2026-63336chainguardcassandra-reaper+38EPSS score0.31%
The RabbitMQ Java client library allows Java and JVM-based applications to connect to and interact with RabbitMQ nodes. Prior to 5.33.0, com.rabbitmq.client.ConnectionFactory.useSslProtocol() and ConnectionFactory.useSslProtocol(String) configure com.rabbitmq.client.TrustEverythingTrustManager and leave hostname verification disabled, causing arbitrary server certificates, including self-signed certificates, to be accepted. A network attacker able to intercept a TLS connection can impersonate the RabbitMQ broker, read protected AMQP traffic, and modify traffic without certificate or hostname validation. The fix changes the production TLS helpers to use the JVM default trust store and enables hostname verification, while retaining an explicitly named development-only no-verification helper. This issue is fixed in version 5.33.0.CVE-2026-63335chainguardcassandra-reaper+36EPSS score0.52%
The RabbitMQ Java client library allows Java and JVM-based applications to connect to and interact with RabbitMQ nodes. Prior to 5.31.0, inbound AMQP command assembly in src/main/java/com/rabbitmq/client/impl/CommandAssembler.java processes a content-bearing method and header whose remainingBodyBytes value is smaller than a following AMQP.FRAME_BODY payload. CommandAssembler.consumeBodyFrame subtracts the peer-controlled payload length before validating that it fits, drives remainingBodyBytes negative, and throws a raw UnsupportedOperationException instead of MalformedFrameException. A malicious or compromised broker peer can send this malformed sequence on an open nonzero channel to terminate frame processing and close the client connection, causing denial of service for work using that connection. This issue is fixed in version 5.31.0.CVE-2026-63337chainguardcassandra-reaper+38EPSS score0.56%
The RabbitMQ Java client library allows Java and JVM-based applications to connect to and interact with RabbitMQ nodes. Prior to 5.33.0, com.rabbitmq.tools.jsonrpc.ProcedureDescription receives a javaReturnType value in an untrusted system.describe response and passes it through JSONUtil.tryFill, setJavaReturnType, and computeReturnTypeAsJavaClass to Class.forName(javaReturnType) with initialization enabled. An attacker able to answer the JsonRpcClient request through a shared broker or network interception can select a class already present in the victim JVM and trigger its static initializer, while JsonRpcClient.java later passes getReturnType output to mapper.parse and may also create type confusion. Successful exploitation can affect confidentiality, integrity, and availability in the client process. This issue is fixed in version 5.33.0.CVE-2026-61634chainguardcassandra-reaper+38EPSS score0.49%
The RabbitMQ Java client library allows Java and JVM-based applications to connect to and interact with RabbitMQ nodes. Prior to 5.33.0, the AMQP connection tuning path records the negotiated AMQP frame_max value, but src/main/java/com/rabbitmq/client/impl/SocketFrameHandler.java and NettyFrameHandlerFactory continue to validate broker-controlled frame payload lengths against maxInboundMessageBodySize because the negotiated limit is not applied consistently through setMaxInboundFramePayloadSize. A malicious or compromised broker can send a method frame larger than the negotiated frame_max during or after connection establishment, causing the client to allocate and decode a protocol-invalid frame instead of rejecting it with MalformedFrameException. The protocol violation can disrupt the affected connection and cause client-side denial of service. This issue is fixed in version 5.33.0.CVE-2026-61837broadcomrabbitmq_server+3EPSS score0.26%
RabbitMQ is a messaging and streaming broker. From 4.0.0 until 4.3.3, 4.2.9, 4.1.14, and 4.0.23, AMQP 1.0 management GET /bindings exposes full binding topology to any authenticated AMQP user without resource/management permission checks. the AMQP 1.0 HTTP-over-AMQP management endpoint GET /bindings (the rabbitamqpmanagement handler) enumerates bindings between an arbitrary source exchange and destination queue/exchange in the caller's virtual host without performing any resource-level permission check. Unlike every sibling operation in the same module (which call checkresourceaccess / bindingchecks), the GET handler ignores the authenticated User and returns the binding list unchanged. As a result, any authenticated AMQP 1.0 client that can open a management link pair , including users with no management/monitoring/policymaker/administrator tag , can enumerate the complete binding topology (source exchanges, destination queues/exchanges, routing keys, and binding arguments) of the virtual host they can access. The equivalent HTTP management API (GET /api/bindings) Confidentiality impact: a non-management AMQP 1.0 user can enumerate the complete routing topology of any virtual host it can connect to , every (source exchange, destination queue/exchange, routing key, binding arguments) This issue is fixed in versions 4.3.3, 4.2.9, 4.1.14, and 4.0.23.CVE-2026-77404debiangolang-github-rabbitmq-amqp091-go+3EPSS score0.10%
RabbitMQ amqp091-go is a Go AMQP 0.9.1 client. Prior to 1.13.0, URI.String in uri.go concatenates CertFile, KeyFile, CACertFile, and ServerName values directly into an AMQPS query string instead of encoding them as URL query parameters with url.Values. If an application accepts a TLS asset path containing ampersand or equals delimiters and later reparses the serialized URI with ParseURI, the embedded delimiters can create or overwrite connection options, including paths to TLS certificate, key, or CA files. This can corrupt connection configuration or select unintended local cryptographic assets. This issue is fixed in version 1.13.0.CVE-2026-77410debiangolang-github-rabbitmq-amqp091-go+2EPSS score0.52%
RabbitMQ amqp091-go is a Go AMQP 0.9.1 client. Prior to 1.13.0, Channel.recvContent in channel.go preallocates the message body slice with the uint64 ch.header.Size value supplied by an AMQP content header without capping the allocation to the negotiated Connection.Config.FrameSize value. A malicious or compromised broker can send an extreme declared body size and cause the Go runtime to attempt a correspondingly large allocation before body data is received. The allocation can exhaust memory and terminate the client process. This issue is fixed in version 1.13.0.CVE-2026-77403debiangolang-github-rabbitmq-amqp091-go+3EPSS score0.52%
RabbitMQ amqp091-go is a Go AMQP 0.9.1 client. Prior to 1.13.0, Connection.openTune in connection.go accepts a server-advertised FrameMax below the AMQP frameMinSize value of 4096 bytes because the connection negotiation loop does not enforce the protocol minimum. A malicious or compromised AMQP broker can therefore advertise an extremely small FrameMax, causing later client publications to be fragmented into excessive numbers of frames and write operations. This can consume CPU and stall the client or its host. This issue is fixed in version 1.13.0.CVE-2026-77407debiangolang-github-rabbitmq-amqp091-go+2EPSS score0.13%
RabbitMQ amqp091-go is a Go AMQP 0.9.1 client. Prior to 1.13.0, PlainAuth values defined in auth.go retain passwords as exported plaintext fields in Connection.Config.SASL after a successful PLAIN authentication handshake. The Connection.openComplete method in connection.go does not clear those values. Code with access to the Connection object, including reflective loggers, application performance monitoring agents, debugging utilities, and panic handlers, can traverse the configuration and expose the credentials to logs or state captures. The credential remains available for the lifetime of the connection instead of being cleared after authentication. This issue is fixed in version 1.13.0.CVE-2026-77405debiangolang-github-rabbitmq-amqp091-go+2EPSS score0.28%
RabbitMQ amqp091-go is a Go AMQP 0.9.1 client. Prior to 1.13.0, tlsConfigFromURI in uri.go creates tls.Config values without setting MinVersion to tls.VersionTLS12. Builds using a Go runtime whose default permits TLS 1.0 or TLS 1.1 can therefore negotiate an obsolete protocol version when connecting through an amqps URI. A network attacker able to influence TLS negotiation with such a legacy build may weaken transport protection for AMQP messages and credentials. This issue is fixed in version 1.13.0.